Wednesday, June 17, 2015

Texas: Right to Hunt and Fish Constitutional Amendment will Appear as Proposition 6 on the November 2015 Ballot!

This morning, the Texas Secretary of State's office held a drawing to determine the ballot position of constitutional amendments that will be considered by voters on November 3, 2015.  We are pleased to announce that NRA-backed Senate Joint Resolution 22, sponsored by state Representative Trent Ashby (R-Lufkin) and state Senator Brandon Creighton (R-Conroe), will appear as Proposition 6 on the ballot this fall.
Proposition 6 proposes an amendment to the Texas Constitution that establishes an individual right to hunt, fish and harvest wildlife in the Lone Star State.  It would ensure that wildlife conservation and management decisions continue to be based on sound science in order to preserve Texas' hunting heritage for generations to come and to protect it against future attacks from well-funded, anti-hunting organizations.  Not only are hunting and fishing deep-rooted in Texas culture, they have a major economic impact on the state.  According to the Congressional Sportsmen’s Foundation, the Lone Star State's hunters and anglers spend $4.1 billion annually and support 65,993 jobs.

Monday, June 15, 2015

Del-ton AR-15 Mid Length Rifle Kit Flat Top Mid Length 16" HBAR Barrel 1:9 Twist 5.56 NATO M4 Stock

Del-ton AR-15 Mid Length Rifle Kit Flat Top Mid Length 16 HBAR Barrel 1:9 Twist 5.56 NATO M4 StockBrand: Del-Ton RKT104
Item: ARR-706
UPC: 848456000959

Del-Ton 16" mid-length rifle kit contains everything you need to build your own .223/5.56NATO AR-15 except for the stripped lower. Kit includes upper receiver, lower parts kit, buttstock, grip, trigger assembly and more.

Specifications:
Manufacturer: Del-ton
Manufacturer Number: RKT104

Barrel:
•Chrome Moly Vanadium
•M4 Feed Ramps
•16" Length
•1x9 Twist
•A2 Flash Hider
•Manganese Phosphated
•Phosphated under Front Sight Base
•Taper Pins in F-marked Front Sight Base
•Threaded Muzzle
•Mid Length Heavy Barrel

Chamber:
•5.56 X 45 mm

Handguards:
•Mid Length
•Aluminum Delta Ring
•Single Heat Shield

Upper Receiver:
•Forged 7075 T6 Aluminum
•A3 Flat Top with M4 Feed Ramps
•Hard Coat Anodized
•Mil-Spec
•Ejection Port Cover and Round Forward Assist
•Right Hand Ejection
•Bore's surface is coated with dry film lube, over the anodized surface

Buttstock:
•M4 5 Position
•Reinforced Fiber
•Mil-Spec Sized Tube

1,000 Yards with a Stock .308 AR-15 Style M&P Model 10?

1,000 Yards with a Stock .308 AR-15 Style M&P Model 10?

Will this stock Smith & Wesson M&P 10 .308 shoot consistently at 1,000 yards?
Will this stock Smith & Wesson M&P 10 .308 shoot consistently at 1,000 yards?
Smith & Wesson M&P 10: http://www.smith-wesson.com/M&P 10
Buy one at GunsAmerica: http://www.gunsamerica.com/Smith-Wesson-Rifles.htm
Can You Shoot 1,000 Yards with a .308 caliber AR-15 style rifle? Well, can you? Conventional wisdom says no. After all, AR’s are semi-automatic designs, with hot burning gas of doom smothering all the important parts like gravy over Cracker Barrel’s Chicken Fried Chicken. Heck, the upper and lower receivers are stuck together with simple push pins. AR-type rifles can’t be all that accurate, can they?
To find out, the folks from Smith & Wesson, NRA Outdoors, Sub-MOA Firearms, Hornady, Huskemaw Optics, Magpul, Blackhawk!, Battenfeld, Champion, SportEar, and Brownells put together a long range shooting school. The rifle of choice? Smith & Wesson’s M&P 10 LE .308. The baker’s dozen of identical guns present were off-the-rack models with no customization other than the addition of a Magpul PRS Precision Adjustable Stock. These were added just so each shooter could customize the length of pull and comb height. AFor optics, all rifles were equipped with Huskemaw Optics 3-12×42 with RFBC Custom Turrets. If you send specific data on the load, rifle, actual velocity and average atmospheric conditions for your area, they’ll print a custom turret with yardages and wind holds marked.
See that shrub out there? That's the 1,000 yard target berm.
See that shrub out there? That’s the 1,000 yard target berm.
A Smith & Wesson M&P 10 LE Model facing targets at 400, 500, 600, 700, 800, 900 and 1,000 targets down range.
A Smith & Wesson M&P 10 LE Model facing targets at 400, 500, 600, 700, 800, 900 and 1,000 targets down range.
Even the Smith & Wesson folks didn’t quite know what to expect from this outing. Sure, they’ve tested the M&P 10 at ranges appropriate for the intended use. It would be hard to imagine the LE model being used in the field for shots over 200 yards. Of course, these rifles have been tested for accuracy at 100, 200 and 300-yard ranges. They were fairly confident we’d be able to reach out to 800 yards with some success, considering the design of the rifle and ballistic profile of the 168 grain .308 round, but even that wasn’t a sure thing.
Over two days, our instructors taught theory, technique, position and lots of math, which enabled us to nail consistently targets at long distance. On day one, we started shooting in a structured environment – the SubMOA Firearms range. It’s got a beautiful shoot house on a mountain peak, equipped with benches, Caldwell Flite Control Front Rests and a passel of Swarovski spotting scopes.
Smith & Wesson designed their own flash hider for the M&P 10 LE. It's intended to suppress both primary and secondary flash. It's also got ports that provide muzzle brake function.
Smith & Wesson designed their own flash hider for the M&P 10 LE. It’s intended to suppress both primary and secondary flash. It’s also got ports that provide muzzle brake function.
A high-quality spotting scope makes all the difference. When you need to read wind 1,000 yards out, it helps to be able to clearly see blades of grass. This Swarovski model fit the bill.
A high-quality spotting scope makes all the difference. When you need to read wind 1,000 yards out, it helps to be able to clearly see blades of grass. This Swarovski model fit the bill.

The SubMOA range stretches 1,000 yards towards 9,000-foot high natural backstops. None the less, some insurance genius made them install 12-foot high berms at each target area. Based on the volume of continuous gunfire, the neighbors have taken to calling this area Little Beirut. Once the shooting started, I completely understood that.
On day one, we used the stable shooting positions and predictable ranges to develop dope books for our individual rifles and the Hornady .308 168 grain A-Max load. Starting at 400 yards, which was easy, we quickly stretched out to 500, 600, 700 and then 800 yards to capture exact elevation adjustments required to get on target given the current atmospheric conditions.
On day two, we moved to more scenic and natural environments. These two targets were 650 and 775 yards away.
On day two, we moved to more scenic and natural environments. These two targets were 650 and 775 yards away.
While it looks close through the Swarovski spotting scope, these targets are 400 yards down range.
While it looks close through the Swarovski spotting scope, these targets are 400 yards down range.

The wind was fairly calm in the morning but got interesting in the afternoon. At times, it was blowing 15 to 17 in our face. That was broken up by occasional left to right and right to left shifts. The 90-degree wind vector rarely exceeded five mph, so it was a good day to test the capabilities of the rifles. Even with the relatively light crosswinds, it quickly became apparent that the biggest variable in long range success is accurate reading and doping for the wind.

The Smith & Wesson M&P 10 at 1,000 Yards

Once we got the hang of shooting the 800-yard target from the bench, we decided to stretch things all the way out to 1,000 yards. The 168 grain .308 is not the ideal 1,000-yard cartridge, but with a consistent load and accurate gun, it’s completely doable.
Just to put things in perspective at what happened to our Hornady 168 grain A-Max bullets, consider this. At 1,000 yards, the bullet drop is a whopping 353 inches. That’s 5.19117 Ryan Seacrest’s stacked on top of each other, but we can just round down to five since he’s not easily divisible. Flight time was 1.77 seconds. That was more than enough time to recover from recoil, leisurely require the target, and still wait to watch the impact. That’s pretty darn cool.
Once we got the wind figured out results were surprisingly repeatable. Initially, we shot from a solid shooting bench with a front rest and a rear sand bag supporting the stock. As expected, this was a solid position, and we were able to knock the 15-inch square steel plate with ease. The only reason for misses was bad wind calls. See what I did there? I just blamed my spotter!
Here's our 1,000 yard target. My shooter/spotter partner and I plugged this 15-inch square target pretty good from 1,000 yards. I'm claiming the one in the center.
Here’s our 1,000 yard target. My shooter/spotter partner and I plugged this 15-inch square target pretty good from 1,000 yards. I’m claiming the one in the center.
We did a lot of prone position shooting using this Blackhawk! Pro-Shooters Mat. It made all the difference on rocky terrain.
We did a lot of prone position shooting using this Blackhawk! Pro-Shooters Mat. It made all the difference on rocky terrain.
Next, we moved to prone and sitting positions, still working the 1,000 yard, 15-inch steel plates. For prone, we attached Caldwell AR Bipods to the front Magpul rail, dropped into position on a Blackhawk! Pro Shooters Mat and got busy. Even applying lots of forward pressure on the bipods for stability, we experienced the same accuracy as from the bench. Keep in mind that the hand guard on this rifle is not free floated, so we thought we might find significant point of impact variance. While we didn’t do scientific group testing to identify a small point of impact shift, we were still hitting that small plate at 1,000 yards with the same dope. If there was any point of impact change, it wasn’t significant.
Next, we moved to a sitting position using Double Crossed Shooting Sticks. Like regular sticks, there are only two points of contact with the ground, but they are split, so there is support at the front and rear of the rifle. Your body serves as an additional ground contact point. Once I got settled, I hit three in a row from a sitting position using the sticks. Yes, shooting sticks. Our NRA Outdoor instruction team knew their long range shooting techniques and taught me an incredibly stable way to use these supports. I know you professional snipers out there can do this with one leg tied behind your back, but for a regular shooter guy like me, I was blown away at this kind of result.
Note the Double Crossed shooting sticks being used by my shooter/spotter partner. He's got an incredibly stable hold from a field sitting position. That's our instructor Dusty on the spotting scope.
Note the Double Crossed shooting sticks being used by my shooter/spotter partner. He’s got an incredibly stable hold from a field sitting position. That’s our instructor Dusty on the spotting scope.
Just a few of the rifles used. They're all stock models, with the exception of the Magpul PRS Precision-Adjustable Stocks.
Just a few of the rifles used. They’re all stock models, with the exception of the Magpul PRS Precision-Adjustable Stocks.
We got consistent results until the barrel heated up. But come on! The Smith & Wesson M&P 10 LE is a pencil barrel rifle, so that’s gonna happen. While I didn’t do scientific testing, it appeared that accuracy stayed consistent for somewhere between 10 and 20 shots in close proximity. Then, if shooting at extreme distance, you’d want to let it cool down for a few minutes. At shorter ranges of less than 400 yards, this overheating would be largely irrelevant. That’s absolutely consistent with the original design goals of this rifle.

Over ¾ of a Mile?

After hitting 1,000 targets with regularity using the Smith & Wesson M&P 10 LE, we got bored and decided to stretch things out a bit more. Just for kicks, we took aim at some large rocks in a sand pit 1,400 yards down range. That’s .8 miles. The sand pit made it easier to spot impacts while we got the range dialed in.
Note the fully ambidextrous controls on the M&P 10 LE.
Note the fully ambidextrous controls on the M&P 10 LE.
I lost count after 57 billion rounds of Hornady .308 ammo sent down range.
I lost count after 57 billion rounds of Hornady .308 ammo sent down range.
The first challenge to overcome was that the trajectory of the .308 round at that distance exceeded the scopes ability to adjust, even using full elevation adjustment and adding holdover with the reticle. Fortunately, a number of the rifles were equipped with some new RAMP mounts from Warne. These have a 20 minute of angle adjustment built in, so the scopes we were using could be adjusted a full 60 minutes of angle in elevation. When using an angled mount, you adjust the scope’s zero much higher in the scopes vertical adjustment range, allowing more elevation adjustment. Our reticle had vertical hash marks at 2, 4, 8 and 10 minutes of angle, so we had wiggle room around our estimated requirement of 65 minutes of angle elevation required. Yep, we had to use all available scope adjustment, plus holdover to get on target.
The barrel on the Smith M&P 10 LE is not free-floated, yet applying lots of pressure to the bipod didn't seem to matter.
The barrel on the Smith M&P 10 LE is not free-floated, yet applying lots of pressure to the bipod didn’t seem to matter.
A new trial for me was the Huskemaw Optics. We used 3-12x42, and that was plenty of magnification to reach 1,000 yards.
A new trial for me was the Huskemaw Optics. We used 3-12×42, and that was plenty of magnification to reach 1,000 yards.
65 minutes at 1,400 yards is one heckuva drop. That’s about 946.4 inches, or 14.339 Ryan Seacrest’s. Put another way, the vertical drop is nearly 2 ½ of those scary high dives your childhood friends dared you to jump from. While falling from the high dive might have seemed an eternity, the flight time of the Hornady 168 grain .308 projectile was even longer. We calculated that the bullet was in the air for 2.54 seconds, give or take. While I didn’t time it, I figured it took about a week for the sound of a hit to travel back to the firing line.
While I wouldn’t want to trust my life to a first shot hit in this scenario at 1,400 yards, we managed to get on target and could reliably put bullets in the vicinity of a few feet. I did notice that Hornady Marketing head Neal Emery dipped into his secret stash of 175-grain rounds and was having even better success at the 1,400-yard game. It pays to have connections, right?
One of the upgrades on the M&P 10 LE model is the Magpul hand guard.
One of the upgrades on the M&P 10 LE model is the Magpul hand guard.
The Magpul PRS Precision-Adjustable Stock allows adjustment of length of pull and comb height.
The Magpul PRS Precision-Adjustable Stock allows adjustment of length of pull and comb height.

Shocked Face

Consider me shocked. I wouldn’t have expected to be able to make consistent and repeatable hits from 1,000 yards with a stock AR-10. Certainly, those results stem from a combination of quality gun, great ammo, and most importantly excellent long range shooting instruction. If you’re interested in learning long range shooting techniques, keep an eye on the NRA Outdoors website. While the current classes are out west, they’re opening up additional ones on the east coast, so matter where you live, classes will be within range. See what I did there?

Friday, June 12, 2015

Senate Bill: ‘Must Retrofit’ Handgun with Smart Gun Tech Before Sale



Armatix Smart Gun (AP photo)
(CNSNews.com) - Democratic Senators Ed Markey (D-Mass.) and Elizabeth Warren (D-Mass.) have put forth a bill that could drastically impact gun sales in America.
Last week Markey and Warren introduced The “Handgun Trigger Safety Act”. It would mandate that in 10 years “anyone selling a handgun must retrofit it with personalization technology before that sale can be completed.”
It would also ban the “manufacture in the United States a handgun that is not a personalized handgun” within 5 years of the measure being enacted.
Smart gun technology allows a handgun to only be operated by an authorized user. It generally works through finger or palm print recognition, electronic password or coded lock, or a gun that needs to be in proximity to a specific watch or bracelet in order to operate.
Currently smart gun technology is pricey. The Armatix iP1 is the first smart handgun to be sold in the U.S. with a reported price of $1,800.
In a press release Markey says, the measure would also “authorize grants to develop and improve ‘personalized’ handgun technology to increase efficacy and decrease costs.”
It would also “provide reimbursement to manufacturers for the costs of retrofitting handguns through the Department of Justice Assets Forfeiture Fund.” 

Thursday, June 11, 2015

CZ82 and CZ83 Pistols Military surplus suitable for defense

CZ82 and CZ83 Pistols Military surplus suitable for defense? CZ83 (380ACP, left) and CZ82 (9x18Mak, right) with their full combat loads of 12+1. CZ83 (380ACP, left) and CZ82 (9x18Mak, right) with their full combat loads of 12+1. My familiarity with 9×18 began with a Makarov pistol in the late 1990s. Cheap surplus ammunition and low cost pistol combination were irresistible to me, and I ended up with a gun that was stone-cold reliable, shot what seemed like a decent defensive round accurately, and was smaller than my other centerfire pistol, Glock 17. The pistol eventually got sold when the novelty and the price wore off. The recoil of the blowback design, heel magazine release, looooong and heavy double action trigger, and the stiff safety all made it less than ideal for my use, and the Makarov was happily replaced by more expensive but far more useful Kahr P9. The only other relatively common 9×18 pistol was the Polish P64, a truly wretched lump of bad trigger and sharp edges that amplified felt recoil. While I’ve seen photos of CZ82 in CZ-USA catalog of 2000, the pistol wasn’t readily available to buy or even to try out at the range. On paper, it looked pretty good: 12+1 capacity, cocked and locked capability along with double action, button magazine release, and decent sights. A similar CZ83 model was available in 380ACP (12+1) and 32ACP (15+1), the latter catching my interest as a possible pistol for the recoil-sensitive. While all of these guns are blowback designs, their thick grips should have helped to absorb the recoil. Although they look heavier, CZ83 weighs the same and CZ82 is only a couple of ounces more than the single-stack Makarov. Recently, I had a chance to take the 380 and the 9×18 models to the range to try them side-by-side. The ergonomics are pretty decent, but the imperfect fit of the grip panels and the resulting seams on the back were felt on recoil. The kick was less than with Makarov but not by enough to make it comfortable. Sights are clear in good light, all-black on the 9×18 and black with three white dots on the 380. The pistols are easy to hold steady until the trigger pull begins. Instead of the expected single action mode, the gun has what appears to be a lighter double action mode: the excessively heavy trigger moves the already cocked hammer even further back, from where it releases to fire. While this almost guarantees no light primer strikes, this isn’t conducive to accurate fire. At best, I could get two inch groups at 7 yards with either gun, while firing the same 380 ammunition through Browning 1911-380 produced 1/2 inch group with overlapping holes. The same 9×18 ammunition fired through Bulgarian Makarov also produced 1/2 inch groups, so the culprits were the pair of CZs. OATH Tango (380, 75gr), HPR hollow point (380, 95gr) and Silver Bear hollow point (9x18, 94gr). Recovered bullets: OATH Tango (380, 75gr, expanded to 0.96″), HPR hollow point (380, 90gr, expanded to 0.44″) and Silver Bear hollow point (9×18, 94gr, no expansion). Velocity measurements, 380ACP: PPU FMJ 95gr 959fps OATH Tango 75gr 1072fps OATH Halo 90gr 1003fps HPR JHP 90gr 900fps Velocity measurements, 9x18Mak: PPU 95gr JHP 954fps PPU FMJ 95gr 946fps Silver Bear JHP 94gr 962fps Although 9×18 in its canonical milsurp form is supposed to be hotter than 380ACP, the numbers show the two to be roughly even in power. The initial bullet diameters are quite similar, .355″ (380) to .365″ (9×18). Expanded diameters favor 380, as neither Silver Bear nor PPU opened up. Hornady makes two expanding 9×18 loads, which are reputed to work better. Since the energy levels involved are limited, the nearly inch-wide Tango penetrated only 4 inches, with the BB-sized nose cap reaching 6.25″. HPR hollow point, while expanding far less dramatically, reached 10.75″ mark before bouncing back, with the bullet resting at the 9″ mark. To me, that seems like the best compromise of expansion and penetration. Strangely, another test of this ammunition done with a shorter barrel gave lower muzzle velocity, same expansion, and penetration exceeding 12″. I am not sure how that worked out, unless my re-melted gel was denser and out of calibration. Given that OATH Tango produced 7″ of penetration when tested in fresh gel, I suspect that my numbers would have to be scaled up proportionally. Neither of the 9×18 “expanding” bullets actually opened up, with penetration around 12″. All 380 and 9×18 ball rounds penetrated more than 16″ and were not recovered. Although felt recoil was about the same with all 95 grain bullets, 90gr HPR load and both of the OATH loads, the 90gr non-expanding Halo and the 75gr expanding Tango) were easier to shoot. One possible reason why Silver Bear gave more of a jolt may have been the hardness of its bi-metal jacket, requiring higher pressure at the same velocity to engrave on the rifling. Overall, I would favor the 380ACP variant due to better availability of quality ammunition. In picking between CZ82/83 and more modern locked breech guns, I would choose either a smaller 380 (such as Browning 1911-380 or G42 or Sig P238) or similarly sized 9×19 (such as CZ Rami), which hold similar amount of more powerful ammunition and show better accuracy with less kick. While I wouldn’t feel poorly armed with either 82 or 83, full-size blowback service pistols are best reserved for range use when better options are available for carry.

Girls With Guns

Girls With Guns: 5 Pieces of Tactical Gear That Fit Form and Function



The popularity of sports shooting is on the rise, and the fastest growing group of new shooters is women. Once they’ve moved past simple, unstructured plinking at the gun range, girls with guns are finding that they want more of a challenge, and many are choosing to shoot competitively, attend regular disaster preparedness classes, or even teach. For this, they will need to invest in some basic tactical gear.

Here are five pieces of tactical gear that fit form and function:

ALERT: Should Obama Have More Control Over Guns? Vote Now

1. Tactical pants are a must because they have multiple pockets. If girls with guns are shooting competitively, or taking competitive shooting classes, they will need tactical pants for extra magazines and other accessories. The knees of tactical pants are usually reinforced for shooting in kneeling positions or lying prone.

2. A tactical vest usually has molle webbing, or special loops to facilitate the addition of magazine pouches and other tactical gear and supplies.

3. A high quality folding knife or multi-purpose tool is a versatile addition. In emergency situations, this could prove invaluable and may even save your life or someone else's. It could be used for simple repairs, opening things, or even to cut a seat belt after an accident to extricate the victim or yourself.

URGENT: Do You Support Obama's Plans for Stricter Gun Control? Vote Now

4. A tactical flashlight is an essential. Many of these come in multi-mode, such as high, medium, and low intensity, as well a strobe function. These each have specific uses, from locating a lost person or object to disorienting an assailant. Some tactical lights come with interchangeable bezels. The crown or pointed bezel can be used as a defensive weapon.

5. A "get home bag" holds only what you need to sustain yourself for 72 hours. This can include some food, water, clothing, and perhaps a simple shelter, as well as extra ammunition and any other personal items you may need.

Thursday, June 4, 2015

CMR-30


CMR-30

Technical specs


Caliber .22wmr
Barrel length 16.1"
Barrel threads 1/2"-28 TPI
Barrel twist rate 1:16"
Total capacity 30+1
Weight empty 3.8lbs
Length
(Stock collapsed)
 22.7"
Length
(Stock fully extended)
 30.6"
Length of pull
(Stock to trigger)
10.3"-14.2"
Height 6.6"
Max width
(Across operating handles)
2.9"
Width across majority
1.2"
MSRP $630.00

Description

The Kel-Tec CMR-30 Rifle is chambered for the .22WMR cartridge (22 Magnum). The design is a rifle version of the popular Kel-Tec PMR-30 pistol. The same 30 round magazines are used. The single action trigger mechanism, bolt stop, ambidextrous safety levers, and mag catch are also identical. The CMR-30 rifle includes a collapsible stock and the 16” barrel is threaded 1/2”-28 to accept many different muzzle attachments. The multi-position collapsible stock allows for a short overall length of 22.7” with the stock collapsed, and 30.6” when extended. The long top picatinny rail will accept a multitude of different optics, and the removable under picatinny rail is included. The ambidextrous operating handles are non-reciprocating and latch in the forward position. The stock latch lever is also ambidextrous and located just in front of the trigger guard. An integral sling loop is included near the rear of the grip, on both sides.

The CMR-30 is constructed of hard-coat anodized aluminum for the upper assembly and rails and houses the steel barrel. The collapsible stock is made with aluminum stock rods, and a nylon butt plate. The stock was designed to have a natural cheek weld when extended. The grip, mag catch, safety levers, stock latch, and operating handles are made of glass reinforced nylon (Zytel). The grip houses the frame which is made of aluminum. The bolt assembly houses a captive recoil spring assembly. Magpul®  flip-up sights included.

The extensive use of aluminum, and a lock time lower than most bolt action rifles makes the CMR-30 a very accurate rifle.

10 Affordable AK-47 Accessories

10 Affordable AK-47 Accessories


There has been a long-standing (friendly) argument in the Cheaper Than Dirt! office—your either Team AR or Team AK. Plenty of gun folks have strong opinions about which is the better rifle. Personally, I believe there is a time and place for every rifle under heaven, so in this case, I bat for both teams.
As more and more people get into modern sporting weapons, manufacturers of firearms and accessories are answering the call from those who want to deck out their AK-47 with stocks, grips, handguards and rail systems that just about rival the availability of accessories for the AR-15. In fact, I have seen so many modifications that if not for the telltale receiver, I would barely recognize the prolific rifle.
Though not as modular or adaptable as the AR-15, there are still plenty of upgrade options for the AK owner that make it more accurate and fun to shoot. Here are our suggestions—products that work for us—for the top ten most affordable AK-47 upgrades and accessories available at Cheaper Than Dirt!

TAPCO INTRAFUSE AK/SKS Front Sight Combo, $6.99

Five colored plastic AK-47 front sights with adjustment tool
Increase the visibility of your front sight with TAPCO’s colored front sight set.
Increase the visibility of your front sight with TAPCO’s colored front sight set. Each sight provides a thicker post than the rifle’s original, making sighting quicker and easier—especially for those whose eyesight is compromised or waning. Made of plastic, the set includes an opaque black, opaque red, translucent orange, raspberry, and neon yellow sight posts. Included is a front sight tool for elevation adjustments. These sights fit all AK-47 models and SKS rifles with the exception of Yugo.Click Here to Start Shopping Online at Cheaper Than Dirt


TAPCO INTRAFUSE AK-47 Magazine, $7.27

Curved, black 30-round AK-47 magazine TAPCO
TAPCO makes a good cheap mag for your AK-47.
If you are looking for an alternative to metal or PMAGs, TAPCO makes a good cheap mag for your AK-47. This 30-round magazine is made of reinforced composite with MIL-Grade glass-filled nylon and counts as three U.S. 922r compliant parts. It is double-stack with a heavy-duty spring and anti-tilt follower.
Click Here to Start Shopping Online at Cheaper Than Dirt

Magpul AK-47 MOE PMAG, $13.25

Black, 30-round AK-47 Magpul PMAG
The PMAG for AK also counts as three U.S. 922r compliant parts and it is made in the U.S.A.
The famous PMAG now for the AK has an impact- and crush-resistant polymer body with removable floorplate and a low-friction, anti-tilt, self-lubricating follower. The stainless steel spring has a long life and the magazine holds 30-rounds of 7.62x39mm ammo. The PMAG for AK also counts as three U.S. 922r compliant parts and it is made in the U.S.A.Click Here to Start Shopping Online at Cheaper Than Dirt


TAPCO M16 Style AK-47 Muzzle Brake, $11.37

Black M16-style muzzle brake for the AK-47
This traditional M16-style birdcage muzzle brake noticeably cuts down felt recoil and muzzle rise.
Counting as one U.S. 922r compliant part, this traditional M16-style birdcage muzzle brake noticeably cuts down felt recoil and muzzle rise. It has multiple locking points for easy installation on any 7.62x39mm AK and is threaded 14×1. The TAPCO INTRAFUSE M16-style muzzle brake is made of steel with a manganese phosphate finish. It is 1.75-inches long and 100 percent made in the United States.Click Here to Start Shopping Online at Cheaper Than Dirt



TAPCO INTRAFUSE AK-47 SAW Pistol Grip, $13.78

Black, textured SAW-style AK-47 pistol grip
The best cheap AK grip we got!
The best cheap AK grip we got! TAPCO’s INTRAFUSE AK-47 SAW-style pistol grip has an ergonomic grip angle, as well as an overall widened grip width for more comfortable shooting. The grip is made of high-strength composite material and has a storage compartment for small parts. It counts as one U.S. 922r compliant part.Click Here to Start Shopping Online at Cheaper Than Dirt



TAPCO INTRAFUSE AK-47 G2 Double Hook Trigger Group, $24.93

Two-piece double-hook trigger group for the AK-47
The industry standard in AK upgrades is the TAPCO INTRAFUSE AK-47 G2 double-hook trigger group.
The industry standard in AK upgrades is the TAPCO INTRAFUSE AK-47 G2 double-hook trigger group. Eliminating slap and reducing the pull to three to four pounds, this trigger counts as three U.S. 922r compliant parts—trigger, hammer and disconnector. It is made of heat-treated 4140 tool-grade carbon steel and has a black oxide finish. The TAPCO INTRAFUSE AK-47 G2 trigger group will not fit Saiga rifles.Click Here to Start Shopping Online at Cheaper Than Dirt
For installation details, read, “Installing the TAPCO G2 Double Hook AK-47 Trigger.”



Leapers UTG AK-47 3rd Gen Side Scope Mount, $21.97

Black side mount scope rail for AK
The side scope mount fits most AKs.
There are plenty of choices when it comes to AK rails and mounts, but the UTG Leapers side mount scope mount is by far Cheaper Than Dirt!’s best cheap scope mount. It fits most AK variants and is machined from aircraft-grade aluminum. It has STANAG dimensions with 12 slots on the top rail and eight slots on the side for accessories. The total length of the mount is 5.5 inches. It has a width of 1.7 inches and a height of 3.3 inches. Weighing only 7.5 ounces, it will clear any scope you have mounted on your AK. This 3rd generation side mount scope mount includes a hex screw and Allen wrench.
Click Here to Start Shopping Online at Cheaper Than Dirt


Uncle Mike’s Tactical Rifle Case 43″, $33.06

Black tactical rifle case with five mag pouches on the outside
You don’t have to spend a fortune to get a quality tactical rifle case.
You don’t have to spend a fortune to get a quality tactical rifle case. This one from Uncle Mike’s is 43 inches long on the inside and will fit a rifle outfitted with a scope or other optic. It has a padded interior for protection and tough zippers that pull smoothly. It is sturdily built and includes five mag pouches with Velcro flaps and a bonus pocket for storing cleaning essentials, tools, targets and other gun range necessities.Click Here to Start Shopping Online at Cheaper Than Dirt


TAPCO AK T6 6-Position Collapsible Stock, $35.12

Black T6 six-position adjustable stock for AK-47
Make your AK look like an M4 with TAPCO’s INTRAFUSE AK T6 collapsible stock.
Make your AK look like an M4 with TAPCO’s INTRAFUSE AK T6 collapsible stock. This one fits stamped receivers and counts as one U.S. 922r compliant part. Made of high-strength reinforced composite, it has six positions to fit any shooter. Fully extended the stock provides a 14.5-inch length of pull, while smaller and shorter shooters will find the 10.5-inch length of pull comfortable when the stock is collapsed. In between fully extended and collapsed are points for 11.25-, 12.25-, 13-, and 13.75-inch length of pulls. A side sling attachment is included in the AK-47 adjustable stock. It will not fit milled or slant-cut receives or MAK-90 rifles.
Click Here to Start Shopping Online at Cheaper Than Dirt
Click here to purchase the stock for milled receivers.
For more stock options, read “10 Stock, Grip and Handguard Upgrades for Your AK.


UTG PRO AMD-65 AK Quad Rail Handguard, $59.74

AK quad rail handguard
Our product tech supervisor calls this handguard the “best rail yet.”
Our product tech supervisor calls this handguard the “best rail yet.” Made to fit Hungarian AMD-65 model rifles, this quad rail handguard counts for one U.S. 922r compliant part. Precision CNC machined from aircraft-grad aluminum alloy, the quad rail has four MIL-SPEC Picatinny rails with integrated quick-detach swivel housings on both sides. The UTG Pro AK quad rail handguard has four rails and is 8.39 inches long, 2.05 inches wide and 3.1 inches tall. An Allen wrench, rubber rail guard, shim spacer, Hex screw and AK barrel spacer are all included.
Click Here to Start Shopping Online at Cheaper Than Dirt
For the same handguard that fits Romanian SAR, WASR, Norinco and US Arsenal AKs, click here.

What is your favorite AK-47 accessory? Share it with others and us in the comment section.

If you are new to the AK-47, read in an introduction to the rifle in the “Buyer’s Guide to the AK Family of Rifles.”

SLRule

Texas: Major Victories for Gun Owners in the Lone Star State as Legislature Adjourns

Texas: Major Victories for Gun Owners in the Lone Star State as Legislature Adjourns

Tuesday, June 02, 2015
As the Texas Legislature adjourns for 2015, the National Rifle Association is proud to have supported numerous successful bills on behalf of its more than 500,000 members throughout the state.
“Despite the best efforts of gun control groups funded by New York City billionaire Michael Bloomberg, Texas gun owners enjoyed several important victories this year,” said Chris Cox, executive director of the NRA’s Institute for Legislative Action. “We’ll continue to defend the Second Amendment and fight for the ability of law abiding citizens to exercise their constitutional rights.”
The NRA’s accomplishments this session include;
  • Passage of House Bill 910, open carry legislation, sponsored by state Representative Larry Phillips and state Senator Craig Estes, which removes the requirement that Concealed Handgun Licensees keep their firearms concealed and allows them to carry in a belt or shoulder holster. This brings the total number of states recognizing this right to 44.
  • A significant step forward was taken for Concealed Handgun Licensees who wish to protect themselves on the campuses of public colleges and universities with the approval of Senate Bill 11, sponsored by state Senator Brian Birdwell and state Representative Allen Fletcher.  Schools will no longer be able to enforce a blanket prohibition against that right on their campuses.
  • Senate Joint Resolution 22, sponsored by state Senator Brandon Creighton and state Representative Trent Ashby, will place a constitutional amendment on the November 2015 ballot asking voters to affirm the individual right to hunt and fish in the Lone Star State.
  • Senate Bill 273, sponsored by state Senator Donna Campbell and state Representative Ryan Guillen, imposes civil fines on state agencies, cities or counties which improperly post 30.06 signs prohibiting CHLs from public property that is not otherwise off-limits to them in the Penal Code.
The Bloomberg funded gun control group Everytown, along with local affiliate, Moms Demand Gun Sense, spent significant resources in direct opposition to most of these proposals through public rallies, lobbying, and media buys. Texans rejected these efforts and instead expanded their Second Amendment freedoms.
“We appreciate the hard work of our sponsors, Lt. Governor Dan Patrick, House leadership, and our legislative supporters for helping achieve these important accomplishments for gun owners in the 2015 session,” Cox concluded.
House Bill 910, Senate Bill 11 and Senate Bill 273 now head to Governor Greg Abbott for his expected signature.