Monday, November 9, 2015

Love the Remington 870

Every year when waterfowl begin their annual trip south, hunters across America oil up their 870s. Countless cops have tricked out 870s, literally riding shotgun. And when something goes bump in the night, those who are serious about defending home and hearth reach for the 870. It is arguably the most common shotgun in America. There are millions of them in this country alone. How many millions? I doubt even Remington knows, for sure–but 10,000,000 is the safe estimate.
Even the box it comes in is pedestrian. This is a no-frills firearm.
Even the box it comes in is pedestrian. This is a no-frills firearm.
So what’s all the fuss? The pump action shotgun has proven itself more versatile and less finicky than the fickle automatics, so hunters trust the design.
Because of the wide assortment of aftermarket options, the 870 is easy to fine-tune and customize, which makes it appeal to tactical shooters.
And for home defense, the pump shotgun is a great deterrent weapon capable of firing a variety of loads.
But most of that list applies to all pump shotguns. Yet the old 870, a design that’s close to 65 years old, is still the standard by which all other pump shotguns are judged.

So what’s the secret?

I’ve been asking this for a long time. I haven’t drunk the proverbial 870 Kool-Aid. I’ve come to this review with a completely open mind. I’ve owned a couple of 870s, but it has never been my go-to gun. They come in, I mess with them a bit, and then I end up selling them to make room for something else. But here’s the rub–several people whose opinions I trust implicitly have 870s as the corner-stone of their tactical armories. And they think I should, too.
The walnut is clear and not highly figured. The wood gives the 870P a classic look.
The walnut is clear and not highly figured. The wood gives the 870P a classic look.
The wooden furniture has a warm feel to it that I prefer over plastic, but it will require maintenance.
The wooden furniture has a warm feel to it that I prefer over plastic, but it will require maintenance.
So I’m giving it a shot. I’m starting with this classic design and I’m going to see what I can do to it to make the 870 the perfect shotgun. This will be a rather involved process, and I plan on overhauling almost every piece of the gun. But my effort is also going to require new training. Even though most pump guns work in a similar fashion, each gun has a nuanced skill set required to make them run efficiently.
The receiver of the 870P is marked Police Magnum.
The receiver of the 870P is marked Police Magnum.

The basics

The 870 is the most common pump shotgun in America. I’ve gone one step further and opted for the Police Magnum. This is an 870 with a few robust improvements. Most companies offer something like the good, better, best model. This is more like robust, more robust, and ridiculous. I prefer the ridiculous end of the robust spectrum.
It is essentially an 870, though the receiver has been milled from a solid piece of steel. In the standard form, the gun comes with walnut furniture. This one has also been parkerized. These three simple improvements hide the standard dual action bars and a bolt which locks up with the barrel. It is a robust deign, for sure.
As far as options go, the 870 is almost as easily customized as a 1911 or an AR-15. From pistol grips, to sights, to furniture…lights, lasers, etc. Remington offers a wide variety of stock options, and the used market is full of custom jobs. But the basic controls of the 870 will stay the same.
One distinct feature of the 870 that I’m having trouble acclimating to is the placement of the safety. Where Mossberg has their safeties on the tang, where you can easily reach them with your thumb, Remington keeps theirs behind the trigger. The safety is easy to reach with your trigger finger. To make the gun safe (at least for those of us who are right handed), you move the trigger finger away from the trigger and roll the thumb over to the other side.
The finger sweeps across the safety and disengages it effortlessly.
The finger sweeps across the safety and disengages it effortlessly.
The safety is easy to engage with the thumb.
The safety is easy to engage with the thumb.
The other main difference in the controls is the placement of the action bar lock. To chamber that first shell, you have to wrap your hand forward on the frame. The Mossberg’s action lock is closer to where the 870’s safety sits. I’ve grown accustomed to hitting it with my thumb when I want to get the action in motion.
The action bar lock is forward of the trigger guard.
The action bar lock is forward of the trigger guard.
If you intend to hit the action bar lock with your right thumb, you have to reach for it.
If you intend to hit the action bar lock with your right thumb, you have to reach for it.
Neither of these are deal breakers. As I’ve spent a lot of time behind a Mossberg, I’ll just have to retrain my brain. But there’s a lingering question, I think, that makes this argument worth having. Is one set-up better than the other?
I like a tang safety. There’s very little chance that I’ll move it one way or the other unintentionally. With the 870’s safety, I can see how I might reach to grip the gun and push the safety off. Then again, that is precisely how it is intended to work. As you reach for the grip, your trigger finger sweeps the safety off. There is not extra step needed to make the gun operational. If your thumb is working the safety, you will need to wrap it back around before you pull the trigger.
So I’m going to call the 870’s safety a clear favorite. As for the possibility that I might disengage the safety accidentally, that is on me. And it goes back to training. If I can keep my finger off the trigger, I should be able to keep the same finger off the safety.
But I’ll be damned if I don’t really miss that Mossberg action bar lock. I have been working this 870 pretty hard for about a month now, and I still can’t get used to giving it the old reach-around. My thumb goes for its habitual position, and there’s nothing there. The action doesn’t open. The whole machine grinds to a halt.
I've loaded this gun a lot in the last month and I've yet to catch my thumb in the gate.
I’ve loaded this gun a lot in the last month and I’ve yet to catch my thumb in the gate.

But what about the reliability?

There’s no disputing the simple fact that the 870’s legendary reliability is at the heart of its popularity. Again we see the old triad of sportsman, LEOs, and home defenders…. They all want a gun that will work. That’s where the old workhorse 870 comes into its own. You can argue about which shotgun is most reliable, or which one is most durable, or which one is most versatile, but the fact remains that the 870 is sufficient for almost everyone. Durable enough. Reliable enough. Accurate enough.
And should the gun break down, the 870 is easy to repair. The very popularity of the platform means that there is a healthy aftermarket supply of parts. Anything broken can be easily replaced. As this is a gun that has moving parts, and one that suffers from the abusive kick of the 12 gauge shells, there are parts that wear out. Springs, mainly. Extractors. Action bar locks.
Some of the 870 issues I’ve seen are attributable to good-old-fashioned redneck gun-care habits. You know who I’m talking about. I have one relative who will complain that his 870 doesn’t work right. Never mind that the gun is older than I am, or that it has never been kept in a safe with controlled humidity. I doubt it has ever been cleaned. The rust you see on the surface of a gun should point to a much bigger problem on the inside. And the old 870 will rust. So do we call this user error?
As for the gun itself, I’ve rarely seen an 870 come from the factory with a noticeable flaw. If one element is sticky or stiff, a bit of polishing usually solves the issue. Tolerances on the guns are loose enough to allow for some modification. We’re talking shotguns, and not the hand-built Italian sporting models.

Accuracy

Again, we reach a place where it is difficult to find a clear winner. Most 12 gauge shotguns of equal length with the same choke will perform in a very similar fashion. But there are notable differences. Sights are the most obvious. This 870 has some crude sights. They are about as crude as you can get on any gun that actually goes to the trouble of adding sights. The front is a simple dot. The rear is just a wide grooved channel.
Yet it doesn’t really change how the gun shoots, and if you have any skill with a scattergun you will be able to put lead or steel where you want it. Check out these results.
The sread from buckshot at 7 yards.
The spread from buckshot at 7 yards. Devastating.
Buckshot from 25 yards.
Buckshot from 25 yards. A wide spread.
High brass steel shot from 7 yards.
High brass steel shot from 7 yards.
High brass steel shot from 25 yards.
High brass steel shot from 25 yards.
Bird shot from 7 yards.
Bird shot from 7 yards.
Low brass from 25 yards.
Low brass from 25 yards.
Two slugs from 25 yards.
Two slugs from 25 yards.

The end is just the beginning

For me, the 870P is a perfectly serviceable firearm. I blame my ambivalence on accidental brand loyalty. If I have a choice between a Coke and a Pepsi, I’m going to drink the Coke. I have no idea when I decided that. The same is true for the 870. But I’ve made a commitment to this gun. In the shape it is in right now, I can begin retraining my brain. And I’ll make the other changes one piece at a time, so the gun isn’t ever out of circulation for too long. And I’ll be back with updates.
So how about it? I know most of you reading this may very well own an 870. What am I missing? What makes this the standard by which all others must be judged? Is it the price? With the millions that are out there, fair trades are easy to find. Prices vary wildly depending on the options and model and caliber. The 870P in this configuration is often listed in the high $400–to low $600 range. But what about the other reliable options? Why not the old Winchester, or the Ithaca, or the Mossberg or Benelli? What is it that makes the 870 stand out as the first choice for so many of you?
The extractor is easy to access and service.
The extractor is easy to access and service.
The ejection happens on the right side and is clean and forceful.
The ejection happens on the right side and is clean and forceful.
The fit is about what you'd expect from a mass produced gun.
The fit is about what you’d expect from a mass produced gun.
The butt-pad is thick.
The butt-pad is thick.
While more intricate sights are available, this is functional simplicity.
While more intricate sights are available, this is functional simplicity.
The brass bead catches available light.
The brass bead catches available light.
The front bead.
The front bead.
The build is solid and the component parts are robust.
The build is solid and the component parts are robust.
No Rem-Chokes for this one. Improved cylinder choke only.
No Rem-Chokes for this one. Improved cylinder choke only.
The walnut forend.
The walnut forend.
It pushes from the left to the right.
The safety pushes from the left to the right.
9 balls of OO Buck from the shells used above.
9 balls of OO Buck from the shells used above.

Troy Takes on the AK-47

The AK has a dedicated cult following here in The States. Despite its reputation as the-rifle-that-won’t-quit, the Kalashnikov is still a hard sell for many who cut their metaphoric teeth on the very American AR-15. There are numerous reasons—too many to list. Some hate the lack of a bolt hold open. Others can’t wrap their heads around the mag release. Still others don’t trust the 7.62 x 39. And some folks are just too patriotic. The biggest complaint: the lack of rail for easily mounting optics.
But each of those issues has after-market fixes (except for the patriotism—I’m not sure that needs fixing). The Russian rifles come in numerous calibers, and can be retrofitted with a variety of American-user-friendly options. That’s where this review is headed, obviously, but we have to make a clear distinction here, at the outset. Troy doesn’t make plastic junk to help Call-of-Duty wannabes make their AKs look cool. These aren’t novelty parts. Troy makes hard-use gear.

When an American gun maker takes on Russia’s shortcomings

The very real threat of terrorism would suggest that everyone, and I mean everyone, should know how to run an AK—and also how to shut one down. With that in mind, I became a student of the platform. And I’ve grown to respect it. But the basic design has its flaws.
This MFT hand guard is functional, but it is too compact for my taste.
This MFT hand guard is functional, but it is too compact for my taste.
I’ve been waiting for this kit for a long time. I’ve been slowly working my way through the aftermarket options for forends, looking for something that will allow me to keep my hand off of the gas tube and barrel. I tend to hold farther out than the stubby forends on most AKs will allow. So when I saw the long tubes on the AKs in the Troy booth at SHOT last year, I was ready.
There was only one problem—the Troy forends wouldn’t clear certain Arsernal AK barrels, because of the threads for their muzzle devices. I talked with Troy several times about the changes being made, and at last a set arrived tailored to the Arsenal.

The benefits

Length is first for me. This long tube allows for a lot more real estate than I’ve ever had on an AK. With this much length, you can wrap way out above the barrel (which is an ideal hold for a rifle with sights this high). If length is not important, Troy makes a short version of the rail, too.
Vent holes allow for air circulation, and for the attachment of rail sections.
Vent holes allow for air circulation, and for the attachment of rail sections.
If you want more texture, add Squid Grip plugs.
If you want more texture, add Squid Grip plugs.
Even the short version has exceptional texture. The tube is cut so that you can grip any surface on the outside of the tube and find a solid hand-hold. If you want more texture, you can stick the rubber squid-suckers into the vent holes. Sections of rail can be added, too, so hand stops and vertical grips are also options.
One thing I’ve found with other forends is a distinct lack of stability. The wooden forends are solid, but don’t offer much beyond modest insulation. Some of the plastic forends are easy to fit, but shoot loose, or come loose when the plastic heats up and expands. The aluminum forends are less prone to this, but most are so thick (and placed in close proximity to the gas tube and barrel, that they heat up quickly and hold that heat longer.
The rear of the forend mates with the receiver.
The rear of the forend mates with the receiver.
The stability of this milled connection is what makes this a viable platform.
The stability of this milled connection is what makes this a viable platform.
The way the Troy forend attaches keeps it from shooting loose. And the open space inside the tube allows for the air to pass freely, which helps cool off the gun and the forend.

How to install it

Taking the old forend off may be incredibly easy. If not, it may require tools, elbow grease, and carefully selected expletives. Once the two halves are off, dry fit the forend. Remove the brake or flash hider and angle in the barrel. The sight post is the real obstacle.
Strip it down.
Strip it down.
Rock the forend over the front sight. You will likely need to take off the muzzle device.
Rock the forend over the front sight. You will likely need to take off the muzzle device.
Cut outs fit existing parts with tolerances just forgiving enough for basic manufacturing variations.
Cut outs fit existing parts with tolerances just forgiving enough for basic manufacturing variations.
bolts inside the forend need to be snugged down. This locks it in place.
Bolts inside the forend need to be snugged down. This locks it in place.
The bolts are not easy to reach.
The bolts are not easy to reach.
Again, improvise as needed.
Again, improvise as needed. A flexible extender makes the job easy.
Install the new top rail. This replaces the gas tube and fits in place easily.
Install the new top rail. This replaces the gas tube and fits in place easily.
If it doesn't slide in place, you may need to find a way to hammer it home. I used a brass punch and a Tru-Glo sight riser.
If it doesn’t slide in place, you may need to find a way to hammer it home. I used a brass punch and a Tru-Glo sight riser locked onto the rail.
I hammered on the riser instead of the rails. Worked perfectly.
I hammered on the riser instead of the rails. Worked perfectly.
Then ratchet down the front end.
Then ratchet down the front end.
In the end, the rail becomes a solid platform on which to mount optics.
In the end, the rail becomes a solid platform on which to mount optics.
The benefit is clear. My old rail was plastic, which is much less stable than the aluminum.
The benefit is clear. My old rail was plastic, which is much less stable than the aluminum.
The end result is a solid fit that compliments the aesthetic of the gun.
The end result is a solid fit that compliments the aesthetic of the gun.

Criticisms

When I finally got the retrofitted gun to the range, I had one issue. The open section below the sight post allows you to get close to that hot barrel. I didn’t have my cleaning rod in, which would have offered another small barrier. Just be careful when you wrap that hand around the end of the forend.
There should be a plate to cover this open cut-out, which is required to get the tube over the sight.
There should be a plate to cover this open cut-out, which is required to get the tube over the sight.
That would keep my hand form coming in contact with the bottom of the barrel.
That would keep my hand form coming in contact with the bottom of the barrel.
The fix? I’d like to see Troy build a small section of tube that simply bolts into place—something that would bring the whole circumference of the tube all the way to the end. If that were available, I’d Loc-tite that plate in place and never take the forend off of this gun. Ever. I like it that much.
As is, I’m going to have to practice a bit before I’m comfortable reaching way out there on that end. And I’ll be wearing gloves.

In the (fore)end

There’s a lot to recommend about this set-up. Even with the open bottom, the forend offers so much more than the typical tactical AK furniture, and infinitely more than the wood. It may not look so much like an AK when you’re finished, but that’s typically not an issue for those of us who want their guns to be as functional as possible.
The long Troy forend sells for $139.95. The top rail is $149.
Add a vertical grip, too.
Add a vertical grip, too.
The Troy grip is modular.
The Troy grip is modular.
It can even be used for storage.
It can even be used for storage.
And the screw can be replaced with a quick release version.
And the screw can be replaced with a quick release version.
The rail sections are easy to install, but you have to have room for the hardware inside the tube.
The rail sections are easy to install, but you have to have room for the hardware inside the tube.
The rail isn't flush fitting, but doesn't protrude much.
The rail isn’t flush fitting, but doesn’t protrude much.
The forend tube has a small section of rail.
The forend tube has a small section of rail.
That section is lower than the section on the gas tube.
That section is lower than the section on the gas tube.
The fit, considering how sloppy some AK tolerances are known to be, is really impressive.
The fit, considering how sloppy some AK tolerances are known to be, is really impressive.
And the whole thing comes together to give the AK a much more modern look.
And the whole thing comes together to give the AK a much more modern look.

Saturday, November 7, 2015

CZ Scorpion EVO 3 S1 Pistol

NRA Gun of the Week: CZ Scorpion EVO 3 S1 Pistol


The third iteration of the CZ Scorpion submachine gun was unveiled in 2009 as the EVO 3 A1, and this year the Czech gunmaker introduced a semi-automatic pistol version of that selective-fire carbine—the EVO 3 S1. Featuring simple blowback operation and chambered for the prevalent 9 mm Luger cartridge, the pistol is essentially identical to its rifle brother, just without the buttstock and the capacity for fully-automatic fire.

Constructed of polymer and steel, the S1 has an overall length of just over 16” and weighs roughly 5 lbs. The gun features numerous Picatinny rail sections for the installation of optics and accessories, bilateral safety selectors and magazine releases and a non-reciprocating charging handle that can be installed on either side of the pistol. Watch the video hosted by American Rifleman's Kelly Young to learn more about the CZ Scorpion EVO 3 S1 pistol. For more, visit cz-usa.com.

Specifications
Importer: CZ-USA
Model: Scorpion EVO 3 S1
Action: blowback-operated, semi-automatic pistol
Caliber: 9 mm Luger
Magazine: 20-round-capacity, detachable box
Frame: reinforced polymer
Barrel: 7.72”, 6-groove, 1:9.8” RH twist
Sights: adjustable, low-profile post front, aperture rear
Trigger: 9-lb., 11-oz.
Length of Pull: 16.5”
Weight: 5 lbs.
Accessories: owner’s manual, sight-adjustment tool, two 20-round magazines, pull-through bore cleaner
MSRP: $849

Hillary Continues Gun Control Gambit but Tempers Her Message for the Masses

Hillary Continues Gun Control Gambit but Tempers Her Message for the Masses

Friday, November 6, 2015
Last month, we reported on Hillary Clinton’s brash embrace of Australia’s mandatory firearm surrender program during a campaign stop in New Hampshire. Her remarks came in response to an audience member’s question about whether America could follow Australia’s lead and “take away” handguns until they’re “all gone.” Her bottom line: “I think it would be worth considering doing it on the national level if that could be arranged.” This followed remarks she had made earlier in October comparing the NRA to “Iranians” and “Communists.”
A few days after Hillary endorsed Australia’s approach, her handlers were attempting to walk back the obvious import of her remarks. “Of course” she wasn’t advocating for Australia-style gun confiscation, a senior aide insisted, even though Clinton’s remarks had come in response to a question about the feasibility of that program in America. The aide then pivoted to Hillary’s support for “tougher background checks on gun sales,” what she called, “very common-sense measures that the majority of the public supports.”
On Wednesday, Hillary continued her gun control push, although with a tempered message more in keeping with the modern gun control movement’s phony, unconvincing message of “common sense gun safety measures.” The latest salvo came in a campaign ad called “Together.” 
Speaking to an audience that hangs on her every word and nods with rapturous approval, Clinton rails against “this epidemic of gun violence,” which “knows no boundaries.” 
Her solution this time? “We need to close the loopholes and support universal background checks.” She continues, “How many people have to die before we actually act, before we come together as a nation?”
First, what she calls an “epidemic of gun violence” is actually a period of history in which nationwide rates of violent crime remain at historic lows. The sort of crimes that gun control advocates live to exploit also remain a rare phenomenon in the U.S. “No matter how you cut it,” a prominent Northeastern University criminologist recently wrote in reference to mass shootings, “there’s no epidemic.” Rather, he stated in another article, “the only genuine increase is in hype and hysteria.”
“Gun violence” is an intentionally misleading term that gun control advocates use to inflate firearm-related mortality. The largest source of deaths from guns in the U.S. remains suicides, although nobody would refer to other common means of taking one’s life as rope violence, bridge violence, or pill violence. Needless to say, the guns themselves are not behaving violently. Every firearm homicide is caused by a human being, usually by a criminal whose willingness to engage in violent acts shows complete disregard of any law. 
Moreover, the fact that some firearm sales and transfers do not go through a background check is not a “loophole.” As we explain elsewhere this week [link to McAuliffe piece], it’s an intentional part of how federal law is structured and takes into account obvious (to most people anyway) distinctions between private, casual conduct and commercial activity undertaken repetitively for livelihood and profit.
Finally, the idea that background checks are a serious, effective response to any headline-grabbing violent crime is simply untrue. Even gun control advocates occasionally admit as much in their more candid moments. Most mass murderers who use firearms obtain them after background checks. And the criminals committing the far more common street crimes with firearms will evade any manner of background check, universal or not.  This is why gun control advocates will occasionally break ranks with their PR strategists and allude to their real goal, confiscation and the elimination of private firearm ownership.
Hillary continues to gamble on gun control as her path through her party’s primary. But will a message calculated to appeal to her base and big donors resonate with America at large during the presidential election?
That’s up to you, the American Voter. Hillary Clinton has spoken loud and clear in support of gun control. Assuming she’s her party’s nominee, pro-freedom Americans must speak back even louder next  November at the ballot box.

Wednesday, November 4, 2015

Oklahoma Police State--WTH

Latching onto the false but popular meme that there is a war on police, a new Oklahoma law makes any so-called “assault” on an off-duty officer a felony. Given that officers often claim almost any contact — even if they initiate it or if it was incidental or occurred in the case of pulling away from the officer’s grasp — is an “assault,” the badge-wearing caste has now been granted great license to abuse the public while off duty and more special privileges not granted us common folk.
Combine this with a law passed in November 2009 making it a felony punishable by a five-year prison term and $10,000 fine to “fortify” a home “for the purpose of preventing or delaying entry or access to a law enforcement officer,” and we see that Oklahoma has gone off the rails.
The law forbids Oklahoma residents to “construct, install, position, use or hold any material or device designed … to strengthen, defend, restrict or obstruct any door, window, or other opening into a dwelling, structure, building or other place to any extent beyond the security provided by a commercial alarm system, lock or deadbolt, or a combination of alarm, lock, or deadbolt.” In other words, Oklahoma residents are forbidden from taking the security measures they feel are necessary to protect themselves in the off chance that police want to one day make a warrantless or no-knock raid on their homes.
Or, as William Norman Griggs writes:
So it is that in Oklahoma, if you fight back when an off-duty cop shoves you in a bar, you can be charged with a felony. If, on the other hand, a SWAT team attacks your home in a no-knock raid, and its effort to breach your dwelling is thwarted because you installed “burglar bars,” you can also be charged with a felony.
Granting one class special “rights” or “privileges” not granted others deprives the others of their rights. Blue privilege is no exception and is further evidence we are living in a police state.

Sunday, November 1, 2015

Obama to Police Chiefs: Crack Down on Gun Owners

On Wednesday, President Obama addressed the 122nd Annual Conference of the International Association of Chiefs of Police (a transcript is available at this link). The president aptly praised the work of America’s law enforcement community. He mentioned the “astonishing statistic” that “[o]ver the last 20 years, police have helped cut the violent crime rate and homicide rate in America by almost half.” He also noted that “over the past few years, the number of police officers shot and killed in the line of duty has fallen to their lowest levels in decades,” with 2013 seeing “the fewest cops shot and killed in the line of duty since 1887.”  We’ll give credit where credit is due – one has to appreciate Obama’s honesty in admitting that crime rates have fallen to historic lows in a period where firearm sales have skyrocketed. 
Clearly, America is doing many things right when it comes to protecting the safety of the public and officers alike. You might think the president’s priority would be to identify, model, and expand the strategies and techniques that have led to these historic gains.  We’ll give credit where credit is due – one has to appreciate Obama’s honesty in admitting that crime rates have fallen to historic lows in a period where firearm sales have skyrocketed. 
Instead, Obama used the occasion to call for a retreat from America’s tradition of lawful firearm ownership and use, a tradition Americans have embraced at record levels while enjoying record progress against violent crime. Clearly, and as usual, Obama fails to grasp an understanding or appreciation of how firearm ownership contributes to the security and safety of our communities.. But then, ordinary, upstanding Americans have never been the president’s main concern. Instead, he is consumed by what he considers the country’s “legacy” of “disparities” and “bias.” He even made a point of telling the chiefs that before he “had a motorcade,” he had gotten tickets he didn’t deserve.   
He also went on to insult their intelligence, and the intelligence of the American people, by ridiculously asserting, “[I]t is easier for a lot of young people in this city and in some of your communities to buy a gun than buy a book. It is easier in some communities to find a gun than it is to find some fresh vegetables at a supermarket. That’s just a fact.”
If by “fact” he meant “lie,” then we agree. But not otherwise. And certainly not as applied to people who are acting lawfully.
Of course, anybody wishing lawfully to buy a firearm at retail has to follow a process that involves appearing in person at a licensed dealer, showing valid government-issued identification, filling out a six-page federal form, and undergoing a mandatory background check.  And those are just the federal requirements. Some states add considerably more, including licensing, training, and waiting periods.  
For criminals who disregard the law, the process is of course considerably easier. But the president only offered policies that would affect the law-abiding, including the same tired suggestions of “universal” background checks and a ban on what he misleadingly called “military-style assault weapons.” His own policy advisors, meanwhile, have told him what additional steps would be necessary to enforce these restrictions, including gun registration and the mandatory surrender of formerly legal firearms. Simply put, the president was not offering serious solutions to crime.
And the cops who work the streets know it. In April 2013, PoliceOne.com, a leading website for law enforcement officers, released a survey of some 15,000 current and former cops.  Nearly 80% opined that a ban on private transfers of firearms between law-abiding citizens would not reduce violent crime. More than 70% said the same thing about an “assault weapons” ban. Meanwhile, more than 91% agreed that the use of a firearm in the commission of a crime should have stiff, mandatory sentences, and no plea-bargains. 
The police chiefs who Obama addressed are of course professionals, and most of them received his comments politely. Comments on a number of law enforcement websites, however, indicated that many officers were not impressed and did not consider the president’s remarks sincere or credible. 
Neither did we. While we can take some comfort in the fact that Obama’s increasingly bold rhetoric is paired with his increasing irrelevance, all that could change with the next election. A number of his would-be successors have openly embraced even more extreme gun control schemes, with Hillary Clinton openly suggesting a national “buyback” program “would be worth considering.” 
Only your activism and your vote can stop them. Next November, make sure your rights are protected. Stand with the NRA and defend the Second Amendment!