Custom Ultralight Surgeon Scalpel Rifle—Full Review
The
author had a custom variant of this .260 Rem. Surgeon Scalpel built
with a Proof Research barrel for a lightweight precision rifle.
To find out more about Surgeon Scalpel rifles, visit
https://surgeonrifles.com/.
To learn more about Proof Research, visit
http://proofresearch.com/.
To purchase a Surgeon Scalpel rifle on GunsAmerica.com, click this link:
https://www.gunsamerica.com/Search.aspx?T=surgeon%20scalpel.
Weight
can be a critical consideration on rifles. The farther you have to
carry one the more critical it becomes. If all you do is lay out on a
mat or belly up to the bench, weight is probably less of an issue. If
the farthest your rifle moves is from the trunk to the bench, a 15 pound
base rifle is no issue. It’s critical enough that most popular rifle
systems have shed weight over the years and continue to do so. It’s
always a balancing act between cost, recoil mitigation, reliability and
consistency—seldom is weight not a factor. Many AR companies are making
receivers and hand guards that maintain strength while shedding weight.
Bolt rifles are doing the same thing using lighter chassis systems and
composite stocks made of carbon fiber, Kevlar, even magnesium or
titanium. Steel barrels are getting lighter using flutes, slimmer
tapers, and shorter lengths. The days of trailer axles or battleship
propeller shafts for barrels are quickly fading on rifles used in
practical applications, and rightly so. One of the latest additions to
this equation are steel barrels wrapped in carbon fiber, often shedding
pounds while maintaining barrel length and rigidity. Some of the most
recognized and thoroughly tested today are made by
Proof Research,
which is part of a precision rifle project I have been working on. But
first, let’s talk about the base rifle for this effort, shall we?
The Cutting Edge
Surgeon Rifles, part of Strategic Armory Corp, builds some of the finest precision rifles you can acquire. Their
591SA
Repeater is the quintessential Remington 700 style action, none are
better. Single-piece fluted bolts make them incredibly strong,
concentric, and smooth as glass to operate. The
Scalpel
adds a large round knob for ease of operation with gloved hands or in
adverse conditions. Mounted in an Accuracy International AX-AICS stock,
it includes an MTU tapered steel barrel that is 24” long and chambered
in .260 Remington. Designed for use with the
THOR PSR
suppressor, the muzzle brake is built specifically for the task and
this caliber. After testing a Scalpel for a couple of projects, I found
it to be incredibly accurate, smooth, and a joy to shoot; just heavy for
my needs. So, a new project was born. A Proof Research 24-inch barrel
was ordered up along with a Timney Trigger. The result for me is
precision rifle Nirvana!
Working the Surgeon during a PRS clinic put on by Marcus Blanchard. It is easy to maneuver even in tight spaces.
I
worked with Surgeon Rifles on the project, and they expertly completed
the Proof Barrel blank, mating it to the action and adding a PSR brake.
All the metal parts were coated in an FDE Cerakote matching the AX-AICS
stock provided by
Accuracy International.
Timney Triggers
provided one of their new two stage triggers. Long my preference, this
trigger was ordered with a one pound first stage and 2.5 pound second,
perfect for combined use. Assembled and test fired, it was shipped with a
single five-round AI magazine. Surgeon also provided some of their
Nexus Ammunition 136-grain Lapua ammunition.
Surgeon’s Scalpel .260 uses an oversized bolt knob perfectly situated for solid and fast manipulation.
SPECS
- Chambering: .260 Rem.
- Barrel: 24 inches
- OA Length: 43.3 inches
- Weight: 10.4 pounds
- Stock: AX–AICS (Accuracy International)
- Sights: 20 MOA rail
- Action: Bolt-action
- Finish: FDE Cerakote
- Capacity: Depends upon magazine type
- MSRP: $5,405 (base rifle price)
Proof Research
Proof
Research makes carbon wrapped barrels, but it’s not their only
involvement in carbon fiber science. Their Ohio-based division has been
devoted to the aerospace and defense industry for years. Building parts
for the F-35 Strike Fighter and B2 Stealth Bomber, they are anything but
new to mating carbon fiber to other materials. They make and use
resins, adhesives, and composite materials that are literally space age;
wrapping barrels is just an extension of that science, and one that has
been exceedingly difficult over the years. Their Montana facility seems
to have cracked that nut as Proof Research Barrels are proving to be
excellent.
Proof Research barrels offer light weight, durability, and precision accuracy. The PSR brake softens recoil even more.
Every
part of the build process is completed in house. Starting with a
purpose-built 416R stainless barrel blank, it is contoured to facilitate
the carbon fiber application. Applied with proprietary materials and
methods, their carbon fiber is applied to each barrel with incredible
precision. Their proprietary carbon fiber has a specific strength 30
times that of stainless steel and specific stiffness seven times greater
than steel. The wrapping process is designed specifically for rifle
barrels. They weigh less, cool faster, and have increased strength and
durability without affecting accuracy, consistency, or repeatability. If
you are looking to shed weight without compromising accuracy and
reliability, Proof barrels are excellent.
Testing
Given
this rifle’s emphasis on competing, my Kahles K 624i 4x24x 56mm scope
was mounted in a set of Seekins Precision rings. A JEC Customs TLD
(Target Locating Device) was added that includes a level. Attaching a
Trijicon RMR, it allows you to spot targets at range without turning the
magnification up and down.
Aadmount
scope covers protect the glass. Stronger than any other covers tested
they fold flat against the scope. David Tubb’s Distance Reduction
Indicator (DRI) was attached for deep angle adjustments. It’s simple
with no need for a calculator.
Elite Iron’s
Revolution Bi-pod provided support. Designed to cradle the rifle it is
incredibly stable. It’s strong, and a front ring allows me to drive the
rifle into barricades or other barriers for support. It’s one of the
most versatile field bi-pods I have ever used. My last addition was the
Thor PSR suppressor for some of the testing.
This Federal 142-grain SMK was very accurate in the Proof Research barrel and consistent a distance.
Accuracy
Once
broken in, the accuracy with the Scalpel was as expected—impressive. My
best group came with my handloads using Berger 130-grain Hybrid
bullets. Designed for use in magazine-fed weapons, it allows me to
safely get 2,900 feet per second for seriously flat shooting. Every
group with this load was under 0.40 inches, with my best measuring right
at 0.25 inches. The Nexus ammunition was almost the same at 0.27
inches. Nothing was outside 0.45 inches. This is at the limits of my
ability under normal conditions. Over the years I have produced a few
five-shot groups that are tighter, but not many, and not in awhile. This
rifle is essentially shooting at the limits of the load and the
shooter—as good as it gets.
Using
hand loaded 130-grain Berger AR Hybrid bullets and Nosler brass, the
Surgeon was very scalpel-like with superb accuracy and long-range
stability.
Where this rifle really shines is working off the
bench or the ground. Moving around barricades and obstacles is a dream.
Balance is about perfect, and it is very handy moving it in and out of
ports. Used during a PRS (Precision Rifle Series) clinic taught by
Marcus Blanchard of
Sidewinder Industries,
it really shined. A top-tier PRS shooter, his clinics run you through
previous matches while he provides insight and training. Marcus’s
two-way sidewinder dope card was also used at each stage. Using Federal
Gold Medal Match 142-grain SMK, it was deadly accurate. The action was
smooth with zero binding, even under stress. Its first test was stellar
so I am really looking forward to more.
Back at the home range it
proved just as consistent out to 1,000 yards during preliminary testing
and truing using Nexus 136-grain ammo. Groups on paper at 300 yards were
mostly sub inch with a few in the 1.25-inch range. At 500 yards the
group grew to fist sized, so 4 inches or so. My best 10-shot group on
the 1,000-yard steel measured in the 8-inch range using the reticle in
the scope to measure. Given a still day it may get better, but this
rifle is holding accuracy under 1 MOA with ease out to 1,000 yards.
Considerations
AWC’s
PSR suppressor was designed for the initial PSR (Precision Sniper
Rifle) .338 LM contract. It is very light weight in incredibly quiet.
AWC’s
PSR Thor is quiet, very quiet, even as a .338 suppressor on a 6.5mm
bore. Impact shift at 100 yards was 2 inches low with no side to side
movement. So long as you are not running rapid fire it provided no
issues. Speed things up and the bolt lift force required increased
considerably. Given the bore difference the first round push was
minimal, but back pressure built up pretty quickly. Unlike and AR that
immediately unlocks the bolt sending gas out the ejection port, a bolt
gun stays locked until you lift the bolt. Wait a bit and it dissipates
out the suppressor, otherwise it gets hard to lift the bolt. Suppressors
vary; just something to test and be aware of.
The PSR brake works
great, so it is loud as expected, but it tames recoil quite a bit. Even
using my hand loads it was possible to stay on target and watch for
hits, misses and splash where appropriate. It’s painful in tight spaces,
but manageable in the open for the shooter.
Final Thoughts
Over
the years I have tested and fielded numerous precision rifles. Proof
Research barrels are as accurate as any comparable steel counterpart,
and more accurate than many. Weight savings on longer barrels is
substantial, often measured in pounds. For small carbines not as much,
but noticeable. Retail on a bolt-action blank is $900.00, about twice
the cost of similar barrels, or more depending on the steel barrel.
Threading to the action and muzzle costs the same; installation is
identical. Drop-in AR barrels are $940.00, a little more, but the margin
is smaller compared to high-end steel barrels that can run $700.00.
Probably not something you put in your budget AR build, but worth it on
some custom rifles. It really boils down to weight and how critical that
is to you. You get the same contour with a longer barrel, still saving a
couple pounds in some cases. For some it’s worth every penny when
building a high-end custom rifle.
Accuracy
International’s AX stock allowed the author to mount the Elite Iron
Bi-pod farther to the rear for use on barricades or obstacles. Those
teeth bite into wood or other surfaces.
This project took
awhile to put together, but it was worth it. Overall weight is minimal;
almost light for a precision rifle. Balance is perfect, and the AX stock
provides usable adjustments that stayed put. The action is smooth and
precise, ejection consistent and positive, and accuracy superb. Given a
duty requirement, I would field this rifle in a heartbeat. Loaded in a
pack, it carries easily and it will get used on long hikes into the back
country. Any limitations on the competition circuit are mine, not the
rifle’s. If you are looking for a truly precision rifle, then give the
Surgeon Scalpel a solid look. If you want to lighten it up, then a Proof
Research barrel should be your first upgrade.
To find out more about Surgeon Scalpel rifles, visit
https://surgeonrifles.com/.
