MAC 10A1A 9MM NEW IN BOX.

MANUFACTURER NO: M10A1A

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: MGC-A6041726

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS SHIPPING

MAC 10A1A 9MM NEW IN BOX. Manufactured by Military Armament, registered in 9MM and 45.



SOME HISTORY AND SPEC ON THE MAC-10 AND 11.  WE ALSO HAVE SOME VERY NICE MAC-11'S IN STOCK NOW!!

"Ingram" MAC - 10/11

Model	"Ingram" MAC-10	"Ingram" MAC-11
Caliber	9 / 11.43 mm	9 mm
Cartridge type	9x 19 mm (Para) / .45 ACP	9 x 17 mm (.380 ACP)
Dimensions and weight
Total weight (with empty magazine)	2 840 g	1 590 g
Overall length	548 mm	460 mm
Length (with folded butt-stock)	269 mm	248 mm
Barrels length	146 mm	129 mm
Fire characteristics
Bullets initial speed	330 / 280 m/s	293 m/s
Rate of fire	1 145 / 1 090 rpm	1 200 rpm
Practical rate of fire	100 rpm	100 rpm
Magazine capacity	30 / 32 rounds	16, 32 rounds
Sighting range	100 m	100 m

Submachine guns "Ingram" MAC-10 and MAC-11 are developed by United States constructor Gordon B. Ingram. Models 10 and 11 differs only in used cartridge type, weight and barrels what is determined by used cartridge type. MAC-10 uses 11.43 mm (.45 ACP) or 9 x 19 mm Para. Modification MAC-11 uses 9 x 17 mm (.380 ACP) this model has smaller dimensions and weight. It was intended for special forces and police. Now it is used by US, United Kingdom, Portugal Armed Forces and a number of Latin-American countries armed forces. Submachine gun has very technologically simple construction. Its serial production began in year 1970 in Atlanta city. Barrels box is made using stamped steel and has rectangular shape. Automatics work on free lock's returning principle. "Ingram" MAC-10 executes single automatic fire, while MAC-11 only automatic. Its lock has rectangular shape as well and it is covering barrel what allowed to decrease submachine gun's dimensions with the same barrels length. Reloading handle is placed on the barrel's box what allows to reload weapon using any hand. When fire is executed it stays stable. "Ingram" is reliable because of its heavy barrel and simple construction. It is said that "Ingram" is fully reliable placed for a long time under water. Small dimensions allow to carry it secretly. Well balanced weapon allows executing fire using one hand. Cartridge-case extraction window is placed from the right side. When fire isn't executed it is closed by barrels frame. "Ingram" has two safety-locks. First serves as reloading handle. It must be turned in 90 degrees to unblock submachine guns lock. When it is turned on there is no clear sighting vision, this signalize that safety-lock is turned on. Second safety switch is placed near the trigger. While it isn't pushed-in lock is also blocked. When barrel is in the front side all openings are closed preventing dirt getting in. Every "Ingram" mechanism stay reliable for a long time and in any conditions opposite to other western weapons. Magazine is inserted in pistol handle. It increases weapons balance and allows to execute fire using one hand. "Ingram" MAC-10, 9 x 19 mm Para uses 30 rounds magazines. High capacity magazines allow to reach high practical rate of fire. However this factor is a disadvantage at once as submachine gun uses too much ammunition. Every MAC submachine guns have pulled-off original construction folding butt-stock. It greatly effects on fire accuracy and makes use more comfortable. However such frame butt-stock isn't comfortable enough. However there were developed versions fitted with wooden butt-stock. Main "Ingram" disadvantages: it is uncomfortable to hold from both hands, as hands are placed nearly, it becomes hard to compensate recoil power and to aim. Joining all the negative factors, they noticeably decrease fire accuracy. Opened sight is placed on the barrels box. Weather barrel is longer, sight is placed at the end of the barrel. Subsonic bullet's speed made suppressor quiet effective. Both models have barrels screws indented to use the same company MAC suppressor. Models can be fitted with longer barrels and special suppressors. Sound suppressors can be also successfully used as additional handle, increasing fire accuracy as well.

CZ Scorpion Evo 3 S1 Pistol, 9mm, 1/2x28 Threads, 20rd Mags 2016 Model

MANUFACTURER NO: 91351

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: 806703913513

More Items From: CZ USA

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS

Finally available for public consumption is the much anticipated Scorpion sub-gun. Imported as a pistol, it is a blowback-operated semi-auto in 9mm with a short 7¾” barrel. Equipped with our newly designed low-profile sights, its rear sight has four different aperture sizes for everything from close quarters to way out there. The sights ride on an 11” Picatinny rail perfect for mounting optics. 2016 models now feature 1/2×28 threads hidden underneath the factory flash-hider, meaning users can fit either 1/2×28 or 18×1 accessories to the muzzle. Also added is a QD sling swivel pocket integrated into the rear sling attachment point.


Simple and reliable, the Scorpion not only has ambidextrous controls, its non-reciprocating charging handle is swappable and reach to the trigger is adjustable.


Our favorite accessory for the Scorpion pistol is our new arm brace adapter, which quickly and easily adds an AR-style pistol buffer tube to the rear of the action, enabling the use of an arm brace for added stability.

Barrett 98B 338 Lapua W/Leupold Scope

MANUFACTURER NO: 14057

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: 816715012890

More Items From: Barrett Firearms

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS SHIPPING

BARRETT FIREARMS

BFM 98B With Leupold MK4 4.5-14 Scope .338 Lapua Magnum, 20 Inch Heavy Barrel, Black Finish, Adjustable Trigger, Bipod/Monopod
Bolt action repeater. Fully adjustable match grade trigger. Twenty inch heavy barrel with muzzle brake and 1:9.35 inch twist. Eighteen inch 1913 optics rail. Forward receiver is drilled and tapped for accessory rails to be mounted at the 3, 6 and 9 o'clock positions. Adjustable polymer cheek piece. Polymer bolt guide acts as dust cover. Ambidextrous magazine release. Ultra absorbent Recoil pad. Mil-spec type 3 Class 2 hardcoat anodized finish. Height adjustable monopod. Harris bipod. Two quick-detach swivel sling loops. Two ten-round polymer magazines. Equipped with Leupold Mark IV 4.5-14 riflescope with Mil-Dot reticle.

Barrett REC7 Carbine, 556/223, 16" ARMS S.I.R. Rail

MANUFACTURER NO: 13200

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: 816715011886

More Items From: Barrett Firearms

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS SHIPPING

Barrett REC7 5.56 W/A.R.M.S. S.I.R. System Rail, MOE Stock

• 5.56 Rifle System
• Two Magazines
• Soft Carrying Case
• A.R.M.S. S.I.R. System Rail

Compact, accurate and completely trustworthy, the REC7 is designed specifically for situations in which there’s no room for error. Styled in the familiar AR configuration, it’s a no-nonsense rifle you can trust with anything—including your life.

This tough-as-nails rifle was designed specifically to answer the call for a low-maintenance, enhanced reliability carbine.
The REC7 rifle’s dependability stems largely from its innovative operating system. Using a minimum number of parts, the piston system separates heat and powder residue from the bolt carrier and trigger assembly. The rifle runs cool and clean, reducing maintenance requirements and increasing endurance.
The patented chrome-lined fluted gas block prevents excessive carbon buildup from operation under adverse conditions. The one-piece 17-4 stainless piston transfers energy to the anti-tilt bolt carrier. Machined from a monolithic block of 8620 steel, the carrier features an integral piston strike face.

The Barrett Enhanced Bolt is made from high-strength 9310 steel. The bolt is designed specifically for use in the piston operated REC7, not just adapted from a direct gas bolt. The bolt’s gas-ring-free design is easy to clean. Reinforced at critical areas, every bolt is proofed and magnetic-particle inspected to guarantee reliable performance.
At the heart of the operating system is a nitrided, two-position, forward-venting gas plug that retains the piston. The piston can be accessed through the front of the gas block without removing the handguard so optical sights or laser devices do not need to be zeroed after routine maintenance.
The REC7 rifle’s forged 7075 aluminum upper and lower receivers are Type 3 hardcoat anodized. The lower houses an ultra-dependable single-stage trigger. The upper supports a free-floated, hammer-forged, chrome-lined barrel with M4 feed ramps machined into the receiver and the barrel extension. A mil-spec A2 flash hider protects the muzzle.
In 5.56 NATO and 6.8 SPC, the REC7 is everything you’d expect from a Barrett rifle, and then some

Barrett Model 82A1 .416 Barrett 29" Barrel Fixed Magazine 10 Round California Legal Version

MANUFACTURER NO: 12353

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: 816715010186

More Items From: Barrett Firearms

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS SHIPPING

BARRETT MODEL 82A1, .416 BARRETT, FIXED MAGAZINE

The popular Barret M82A1 chambered in .416 Barrett with a 29" barrel and a fixed magazine for California legality
FASTER WITH AGE.
Perfection isn’t accomplished overnight. Nowhere is this more apparent than in the Model 82A1. For more than two decades, this short-recoil, semi-automatic series rifle has been carefully honed, studied and then refined again. The result is a feat of engineering so impossibly precise, it’s hard to believe it’s man-made.
After 25-plus years of making history, the powerhouse rifle that started it all is still leading the pack. With its low perceived recoil and self-loading action, the Model 82A1 offers rapid, accurate firepower that never slows down.
As the first and only semi-automatic .50 caliber rifle available, the Model 82A1 continues to blaze new territory. Its chamber is chrome-plated and dimensioned for both civilian and military ammunition. The extractor and ejector are proven to work under any condition, and close tolerances on every part allow it to function in all environments. The muzzle brake, dual barrel springs and long mainspring design make this iconic rifle comfortable and exciting to shoot.
The Model 82A1 fits into a regular sized carrying case. Although it’s transported as a disassembled upper and lower receiver, it can be ready to fire in under a minute. The scope remains mounted on the upper receiver, maintaining scope zero. the rifle’s M1913 optics rail has a 27 MOA taper to take full advantage of the scope’s elevation travel.
Rapid, accurate fire from its ten round magazine is a breeze.
The Model 82A1/M107 is what you expect in a Barrett. Dependable. Reliable. Well-designed. There are no competitors.
Emergency iron sights provided. Nerves of steel are not.
Barrett M82A1 Features

	M1913 STEEL OPTICS RAIL, 27 MOA ELEVATION
	10-ROUND NON-DETACHABLE MAGAZINE
	DUAL BARREL SPRINGS
	CHROME CHAMBER

Air/Watertight Pelican carrying case
Carry Handle
Flip-up Iron Sights
Sling Attach Points
Barrett M82A1 Specifications

MODEL: M82A1	OVERALL LENGTH: 55.75” (141.6 cm)
CALIBER: .416 Barrett	BARREL LENGTH: 29” (73.7 cm)
OPERATION: Semi-Automatic	RIFLING TWIST: 1 turn in 12” (30.5 cm)
WEIGHT: 32.52 lbs (14.75 kg)	MAGAZINE CAPACITY: 10 Rounds

Barrett 82A1 Videos The Model 82A1rifle is a rugged, dependable semi-automatic rifle. In simple terms, it has earned unmatched respect because it works in battlefield conditions. Our military men and women have depended on over 5,000 Model 82A1/M107 rifles to protect themselves and to protect our freedoms.



Unlike other semi-automatic .50 BMG's, the Model 82A1 is completely reliable. Its chamber is chrome plated and dimensioned for both civilian and military ammunition. The extractor and ejector are proven to work under any condition. Close tolerances on all parts and intelligent design allows it to function in all environments. The trigger is appropriate for a battle rifle.

Barrett Firearms Barret Model M107A1 .50 BMG 20" Chrome Lined Barrel Suppressor-Ready Muzzle Brake Black Ceracote Finish

MANUFACTURER NO: 14084

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

ITEM #: 816715012425

More Items From: Barrett Firearms

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS SHIPPING

Model M107A1 Thermal cheek guard. Back up iron sights. Suppressor capable operating system. 7075 aluminum upper receiver. Integral 27 MOA 24 inch M1913 accessory rail. Chrome lined chamber and bore. Suppressor ready muzzle brake. Lightweight quick-detach bipod with modular feet. 10 round magazine with cartridge witness indicators. Modular hand grip mounted on M1913 rail. Lightweight monopod. Sling attach points and owners manual. 1 in 15 inch right hand twist. Manual thumb lever safety.

Barrett 99 50BMG 29" Fluted Barrel with Leupold Scope & Barrett Rings

MANUFACTURER NO: 13143

Images shown may not be an exact representation of the actual product.
You may contact us if you have questions about the exact specifications of this item.

Similar to image

ITEM #: 816715011688

More Items From: Barrett Firearms

 0 of 5 STARS    0 REVIEWS | WRITE A REVIEW

DETAILS SPECIFICATIONS

BARRETT

Model 99 50BMG 29" Barrel, System W/Leupold Scope

Package includes a Leupold Mark 4 4.5-14X50 Scope and ZERO-GAP Ultra High rings..

M1913 Steel optics rail (parallel with bore, 13.75" long), unitized barrel and aluminum receiver, detachable bipod with adjustable legs, hard carrying case. Includes Leupold scope and Barrett Ultra High Rings. 50 BMG, 1rd, 29” Fluted

 Comes with Bipod and Hard Carrying Case

Rugged. Reliable. Uncomplicated. The Model 99 is designed for one thing only: to get the job done. With its brilliantly simple design, hard-core construction and surprisingly few moving parts, it offers match-winning accuracy time and time again.
At the heart of this robust and accurate bolt action rifle is a one-piece 7000 series aluminum alloy extrusion. A heat-treated steel M1913 optics rail is attached to the top of the extrusion by closely spaced high-strength bolts. The match-toleranced barrel is pressed and locked into the receiver, creating a rock-solid unitized structure on which to mount a riflescope. The Model 99 barrel is made in a heavier contour to ensure repeatable accuracy. The chamber area is encased by the thick-walled aluminum extrusion of the receiver, resulting in unparalleled safety for the shooter.
The bolt is machined from a single piece of shock-resistant tool steel. The action’s strength is exemplified by the 15 bolt lugs that lock into the machined barrel extension. The bolt’s few moving parts, an extractor, ejector and firing pin assembly, make it reliable and easy to maintain.
The Model 99 is easily disassembled without tools by removing three quick-release assembly pins. These pins attach the trigger housing and bolt guide to the receiver assembly. The match-quality trigger design is exclusive to Barrett and virtually maintenance-free. The bipod can easily be detached for benchrest shooting.
Known as much for its dependability as its versatility, the Model 99 combines smooth functionality with dead-on accuracy, shot after shot