Saturday, March 25, 2017

FIREARMS TERMINOLOGY

Custom Search



COMPLETION/ENTRY OF LI
CENSES TO PURCHASE/
PISTOL SALES RECORDS
N.C.I.C. CODES
NCIC codes are required for manufacturers for en
try into the Automated Pistol Registration
System (APRS).
SIGNAT
URES
Verify that all documents have the required sig
natures: chief of police, sheriff (or authorized
deputies) the owner of the pistol on both the Lice
nse to Purchase and Pistol Sales Record and
the notary’s signature on the License to Purchase
.
VERIFICATION OF GUN DESCRIPTION
Verify that at a minimum the serial number, m
anufacturer, caliber and type are complete on the
License to Purchase or Pistol Sales Record.
PRODUCTION NUMBER
LISTED AS SERIAL NUMBERS FOR SW
If the serial number does not appear to be correct, please attempt to contact the owner for
verification.
1. Production numbers on Smith & Wesson are generally 4 or 5 digits and are found on the
crane (hinge) of a revolver.
2. The manufacturer's serial number is located on the BUTT of the weapon. (Remove grips
that may cover the serial number.)
3. If the correct serial number is 4 or 5 digits, indicate "butt #" on the License to Purchase or
Pistol Sales Record so the Fi
rearms Records Unit will not a
ttempt to verify further.
4. If the weapon is of antique vintage, the serial
number may be in a different location (usually
on inside of butt strap directly behind trigger guard).
OTHER INFORMATION TO LOOK FOR IN COMPLETION OF DOCUMENTS
1.
Verify that street/city addresses include numbe
rs, street name, and city. Be sure that “Date
of Birth” is completed correctly and does not reflect the current year.
2.
If a License to Purchase or Pistol Sales Records is issued
for a frame only, indicate the caliber
that will be chambered and indicate "frame only" in Miscellaneous field.
3.
If caliber is unknown, indicate "0000" in the Caliber field.
4
.
.38-caliber S&W CTGE on barrel means pistol
takes a 38 Smith & Wesson cartridge. This
may not be the manufa
cturer of the pistol.
35
FIREARMS TERMINOLOGY
ACCESSORY BARRELS
1. Additional barrels that may be installed on
a frame or receiver for the purpose of
altering the caliber, gauge or barrel length of a firearm. An accessory
barrel may have
an attach
ed fore-end or other attachments.
2. Any barrel that changes the caliber of a firearm, that is truly a barrel only and does
not have a breech mechanism of
a kind or type normally associated with the parent
firearm, is deemed to be an Accessory Barrel,
whether or not it is attached to a barrel
extension or “upper receiver.”
AIR, SPRING OR GAS FIREARM
A firearm design that uses compressed air, compressed gas or a spring to propel a projectile.
AMMUNITION
One or more loaded cartridges consisting of a primed cartridge case and propellant. May or may
not contain one or more projectiles (Example
s: Ball Ammunition, Blank Ammunition and Duplex
Ammunition).
AMMUNITION, METALLIC
A generic term for rim-fire and center-fire a
mmunition having a metallic cartridge case.
AMMUNITION, CASELESS
Ammunition that has the propellant charge molded to the base of the bullet or molded around the
bullet, not enclosed in any kind of a cartridge case.
AUXILIARY CHAMBER ADAPTERS
A device that may be inserted into a firearm to adapt the original chamber to fire a different
cartridge. This adapter may have a section of barrel attached.
BALLISTICS
The study of a projectile in motion.
BALLISTICS, EXTERIOR
The study of the motion of a projectile after it leaves the barrel of the firearm.
BALLISTICS, INTERIOR
The study of the motion of projectile(s) within t
he bore of a firearm from the moment of ignition
until exit from the barrel.
BALLISTICS, TERMINAL
The study of the projectile’s impact effect on the target.
BARREL, RINGED
A barrel that has been fired while containing a bore
obstruction, without catastrophic failure. The
resultant excessive radial pressure causes circumferential bulge in the barrel.
BARREL TIME
The elapsed time from the ignition of a cartridge and the bullet’s leaving the cartridge case neck
to the time the bullet exits the barrel.
BARRELLED ACTION
A shotgun or rifle without the stock.
3
6
BARREL
That portion of a firearm through which a project
ile or shot charge travels under the impetus of
powder gasses, compressed air or other like means.
A barrel may be either smooth or rifled.
BLOWBACK
This system in its simplest form relies on the
mass of the breech block and the strength of the
return spring to accomplish the locking cycle in keeping with the law of physics dealing with
inertia. The recoiling mass being much greater than the mass of the projectile, there is a time
delay in the opening of the breech until the
residual gas pressures have dropped to a sate
operating level.
BOLT ACTION
A magazine-repeating firearm design in which the breech bolt or closure device operates in line
with the bore. This type of action is manually operated by a permanently fixed projection or
handle attached to the bolt or closure device, usually known as the bolt handle.
BOLT/BREECH BOLT
The locking and cartridge head support mechanism of a firearm that operates in line with the axis
of the bore (Examples: Colt AR 15 rifle, Winchester Model 70).
BOLT RELEASE
A device that allows the bolt to be removed from the firearm.
BOLT STOP
A device that retains the bolt in
the firearm during normal operation.
BREECH BLOCK
The locking and cartridge head support mechanism of a firearm that does not operate in line with
the axis of the bore (Example: FN FAL rifle, Bren gun).
BREECH LOADER
Any firearm loaded with a cartridge or propellant from the rear of the bore.
BREECH LOADING, SINGLE BARREL-SINGLE SHOT OR MULTIPLE BARREL-MULTIPLE
SHOT FIREARMS
Firearms in which the action of loading is acco
mplished one cartridge at a time in each barrel,
usually by hand. The breech is then manually clos
ed, a shot or shots are fired, the breech is
opened manually, and the loading action is repeated by hand for each barrel to be discharged.
BREECH PLUG
In percussion and flint-lock firearms, the metal par
t that is threaded into the breech end of the
barrel and usually incorp
orates the top tang.
BREECH, STANDING
That portion of the receiver or frame of a revolver
or break-open single-shot or multi-barrel firearm
that supports the head of the cartridge when it is fired.
BULLET, DUMDUM
An obsolete term referring to a bullet with an exposed lead tip for the purpose of expansion upon
entering a medium with greater density than air.
Manufactured at the British Arsenal located at
Dumdum, India.
BULLET, INCENDIARY
A bullet containing a chemical compound that ignites on impact to start fires.
3
7
REPEATING FIREARM
A firearm with a mechanism for feeding ammunition into the chamber known as magazine
or belt that accomplishes the entire cycle of
operation, either manually or externally
powered, or by utilizing some of
the power genera
ted by the propellant
gas or recoil force.
Some of these mechanisms, externally pow
ered systems or hand operated systems of
operation, include:
1. Pump action mechanisms
2. Lever action mechanisms
3. Bolt action mechanisms
4. Auto-loading or semiautomatic mechanisms; recoil-operated (both long and short
recoil) and gas-operated mechanisms
5. Automatic mechanisms; recoil operated (both long and short recoil) and gas operated
6. Manually powered, hand-operated, ro
tary-barrel mechanisms (Gatling gun)
7. Externally powered mechanisms (V
ulcan Gatling or Hughes Chain gun)
REPRODUCTION
The modern manufacture of any firearm that ha
s ceased to have patent protection and is usually
no longer manufactured by the original maker. No
rmally the reproduction is equal to or better in
quality of material and workmanship than the original and in some cases may be an exact
duplicate with interchangeable parts and components.
REVOLVER
A firearm, usually a handgun, with a cylinder having several chambers so arranged as to rotate around
an ax
is and be discharged successively by the same
firing mechanism
RIFLING
A system of helical grooves cut into the bore of a firearm barrel. The purpose of rifling is to impart
spin to a projectile passing thro
ugh the barrel, thus giving the pr
ojectile gyroscopic stability during
its flight to the target.
RECEIVER
The receiver, which is also known as the frame,
is the basic component of a firearm to which all
other components are assembled or attached. In mo
st firearm designs the barrel is assembled to
the receiver and the receiver houses the breech mechanism, trigger and firing mechanisms.
RIFLE
A firearm designed or redesigned, made or
remade, and intended to be fired from the shoulder and
designed or redesigned and made or remade to use the energy of the explosive in
a fixed metallic
cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger.
SAFETY CATCH
Any type of applied safety catch. A mechanical
device that enables the sh
ooter to lock the firing
mechanism of a firearm voluntarily. Also called a manual safety or manually operated safety
catch. (NOTE: On most firearms with a fully-automatic fire capability, the fire selector usually
incorporates the safety catch.
SAFETY PRECAUTIONS
A series of actions, verifications and precautions that must be undertaken before, during and after handling
a firearm o
r during firing of firearms to prevent accidents and personal injury.
SAFETY, MECHANICAL
An automatic device that prevents firing a firearm as long as certain conditions are not met. A
feature incorporated into the firearm's design
to ensure that the weapon cannot fire, howeve
r
mishandled, before the breech is properly locked; and that the breech will not unlock until such
time as the projectile has left the barrel and
pressures generated to expel the projectile have
ropped to a safe operating level.
d
4
4
SEAR
Part of the firing mechanism, linked to the trigger, that retains the hammer or striker in the cocked
position until the trigger is pulled.
SELECTOR
1. In double-barreled firearms, a device to a
llow the shooter to choose which barrel is
to be fired by the first pull of the trigger.
2. A lever that enables the shooter to choos
e the type of fire (full-automatic/semi-
automatic) or apply the safety catch; in t
he case of some automatic weapons, the
selector enables the shooter to choose high or low cyclic rate of fire.
SEMIAUTOMATIC
A repeating firearm requiring a separate press of
the trigger for each shot
fired, using the energy
of discharge to perform a portion of the operating cycle. Semiautomatic actions are sometimes
referred to as auto-loading or self-loading actions.
SERIAL NUMBER
A combination of numbers and letters applied to a
firearm in order to uniquely identify it from all
others of its type. There is a requi
rement for the serial number to contain a minimum of one digit in
the combination of letters and numbers that comprise the serial number.
SHOT COLLAR
Plastic or paper insert surrounding the shot charge in
a shot shell to reduce distortion of the shot
when passing through the barrel.
SHOTGUN
A firearm designed or redesigned, made or remade and intended to fire from the shoulder and
designed or redesigned and made or remade to use
the energy of the explosive in a fixed shotgun
shell to fire through a smooth bore either a number of
ball shot or a single projectile for each single
function of the trigger.
SHOT
Pellets of various sizes used in shot shells and shot cartridges.
SIGHT, BUCKHORN
A rear sight for rifles that has the “V” notch at
the bottom of an almost completely closed V.
SIGHT, PAINE
A rear sight on pistols or revolvers having a flat top with a V-shaped notch used with a bead
pped front sight. Named after Ira Paine, a 19
th
-century exhibition and competition shooter.
to
SIGHT, PATRIDGE
A rear sight on pistols or revolvers having a flat top with a square notch used with a broad
flat-topped front sight. Named after E.E. Patridge.
SIGHT, PYRAMID
A type of front sight of triangular appe
arance. Also called a Barley-Corn sight.
SIGHT RADIUS
The distance between the rear sight and the front sight on a firearm.
SIGHT RAMP
A front sight mounted on a ramp base.
SIGHT TANG
Any sight mounted on the upper tang of a firearm.
4
5
SIGHT TANGENT
A rear sight in which the blade is adjusted for el
evation correc
tion
by sliding along a curved cam o
r
cams. The term is also us
ed for vertically standing back sights with sliding rear apertures.
SIGHTS
1. ADJUSTABLE - Usually taken to mean a rear sight that is adjustable for windage
or elevation or both. O
ccasionally adjus
table front sights may be found on pistols or
revolvers.
2. APERTURE - A form of metallic sight, fr
ont or rear, containing an aperture or disc
with a hole. Also called a Peep Sight.
3. BEAD - A form of front sight, usua
lly found on shotguns,
having the appearance
of a round bead.
4. EXPRESS- A series of rear sights, mounted on one base, with folding sight
leaves to be used for varying ranges or elevations.
5. FIXED - Metallic sights that are not adjustable.
6. GLOBE - A form of front sight usually used
on target rifles, generally cylindrical in shape
and often arranged to accept various insert
s containing either rings or posts.
7. HOODED - A front sight that is provided with a cover to shade it from direct light.
8. TELESCOPIC - A sight containing optical elements that magnify the target.
9. VERNIER - A long-range sight with a
mechanism for adjusting windage, elevation
or both, as read on a scale in conjunct
ion with graduations on a longer, linear
calibrated scale.
SILENCER
A device capable of attachment to the barrel of
a firearm designed or intended to reduce the
noise of discharge of ammunition
SINGLE-SHOT
A single-barrel firearm design that must be manually loaded, having no internal or external
magazine feed device. Certain single-shot firearms
are operated by levers and certain single-shot
firearms are operated by a bolt. Regardless of
the method of operating the breech mechanism,
these firearms are single-shot firearm actions.
SINGLE ACTION
An action that requires the manual cocking of the
hammer before pressure on the trigger releases
the firing mechanism.
SMALL ARMS
Hand-operated, hand- or shoulder-controlled firearms, including machine
guns, up to and including
.50 caliber. It is generally ac
cepted that firearms in excess of .50 caliber up to and including 30mm
caliber are called cannon, while firearms in excess of 30mm are artillery.
SPRING
A mechanical device used to store energy.
STOCK
A component, usually wood, to which a barreled ac
tion is attached, enabling the shooter to hold
the firearm and control it from the shoulder.
SUBMACHINE GUN
A firearm design that, as originally designed an
d manufactured, has the capacity of firing
projectiles in rapid succession during one press of
the trigger, whether or not it has been altered
to fire only one projectile with one such press. In general terms a submachine gun is a compact,
hort-barreled, air-cooled, magazine-fed firearm,
usually chambered for a pistol cartridge.
s
SYMPATHETIC DISCHARGE
The simultaneous firing of two or more cartridges
chambered in the cylinder of a revolver, only one
of which is in exact alignment with the barrel;
normally associated with percussion revolvers.
4
6
TAKE-DOWN FIREARMS
A rifle or shotgun in which the barrel and sometimes the magazine and fore-end are designed to
be removed from the receiver readily, without the use of tools, for the purpose of making a more
compact item for ease of transportation. When
additional barrels are available for a take-down
firearm, these barrels are considered accessory
barrels. See definition of accessory barrels.
TOP-BREAK
A term used to describe a single-shot, multi-barrel
or revolver mechanism on which the barrel o
r
barrels are allowed to tip down at the muzzle
exposing the chamber or chambers for loading,
unloading or extraction of cartridges.
TOP-LEVER
The lever located on the top of the breech end of
hinged-frame firearms that when pushed to one
side will unlock the barrel
(s) from the receiver or
frame and allow them to move (left, right, forward,
rearward, tip-down or tip-up).
TRIGGER
That part of a firearm mechanism that is moved
manually to cause the firearm to discharge.
TRIGGER , RELEASE
An unconventional mechanism in which the firearm is
fired by the release, rather than by the pull
of the trigger.
TRIGGER, SET
Either a single or double trigger arrangement
on which the required trigger pull force can be made
very light by means of a "setting" mechanism.
UNLOCKING
A stage in the cycle of operation of a firearm in which the bolt, breech block or standing breech is
removed from fixed relationship with the chamber, so
as to permit the extraction and ejection cycle
to take place after pressures have dropped to a safe operating level.
VIERLING
A four-barreled shoulder arm that usually
has two smooth-bored and two rifled barrels.
WATER TABLE
The flat portion of the receiver or frame on fir
earms that break open, ex
tending forward from, and
is approximately at right angles to, the standing-b
reech face. This is the surface on which the
barrel flats rest when the action is closed.
47
BULLET, EXPLOSIVE
A bullet containing a primer or other explosive designed to explode on impact.
CALIBER
1. Firearms--the approximate diam
eter of the circle formed by the tops of the lands of a
rifled barrel.
2. Ammunition--a numerical term, without the decimal point, included in a cartridge name
to indicate the approximate bullet diameter.
CAPE RIFLE/CAPE GUN
A double-barreled shoulder arm with barrels side by side, one being smooth bore and the other
being rifled.
CAP, PERCUSSION
A
small, generally cylindrical metallic cup cont
aining a primary explosive used to ignite the
powder charge in muzzle-loading (and some breech-loading) firearms.
CARBINE
A rifle of short length and light weight or
iginally designed for mounted troops.
CARTRIDGE CASE
The container for all other components that comprise a cartridge.
CARTRIDGE, DUMMY
An inert cartridge that cannot be fired.
CHOKE
An interior constriction at or near the muzzle
end of a shotgun barrel bore for the purpose of
controlling shot dispersion.
CLIP/ CHARGER CLIP/ STRIPPER CLIP -
A separate cartridge container/device to hold cartri
dges for the purpose of rapid reloading. In the
case of certain firearms the charger clip becom
es an integral part at the firearm mechanism
(Example: U.S. Rifle M-1 Garand). The term “clip” is also used erroneously to describe cartridge
magazines.
COCKING
A stage in the cycle of operation of a firearm in
which the firing mechanism is placed under spring
tension.
COMBINATION GUN
A firearm having more than one barrel installed on the receiver in which the barrels are
permanently attached to each other. In the case where there are two barrels, each barrel must be
chambered for a different caliber cartridge. In the case of a Combination Gun having more than
two barrels, the individual barrels of the firearm w
ill be chambered for at least two different caliber
cartridges. This firearm may be found with two, three or even four barrels in any combination of
rifle or shotgun gauges or calibers.
COMMERCIAL VERSION
A firearm design that is a semiautomatic version
of a traditional military and police full-automatic
firearm. Commercial version type code CV describ
es a firearm that, as it left the manufacturer,
was designed and intended to fire semiautomati
c only. The type code CV describes only those
firearms that would otherwise be unclassifiable
by TYPE according to the existing system when
the full-automatic capability is removed during manufacture.
3
8
COMPENSATOR
A device attached to or integral with the muzzle
end of the barrel to utilize propelling gasses for
counter recoil. Also called a muzzle brake.
CONVERSION UNIT
Any device that changes the caliber of the parent firearm, consisting of an assembly of parts; as a
minimum comprised of a barrel and a breech me
chanism of a kind or type normally associated
with the parent firearm and having a breech fa
ce capable of supporting the cartridge head.
CONVERTED-AUTOMATIC
A firearm that, as originally designed and manufac
tured, had the capacity of firing projectiles in
rapid succession during one pressure of the trigger and has subsequently been altered to fire
only one projectile with one such pressure.
COOK-OFF
The ignition of a cartridge by overheating.
COPY
A firearm manufactured in visual imitation of another firearm with or without the benefit of
permission or license. These copies are normally
manufactured to gain an advantage in sales,
marketing, or research and development costs at the expense of the company whose firearm is
being copied. Copies are not normally dimensionally interchangeable with the firearm being
copied. Also known as a counterfeit copy or knock-off.
CONVERTIBLE
The term convertible is applied to revolvers in which the cylinder may be interchanged with other
cylinders to permit the firearm to discharge ca
rtridges of different calibers with the same
approximate bullet diameter. When this concept is applied to firearms other than revolvers, for
correct terminology refer to ”Auxiliary Chamber
Adapters,” “Accessory Barrels” and “Conversion
Units.”
DAMASCUS
An obsolete barrel-making process. The barrel is
formed by twisting or braiding together steel and
iron wires or bars. The resulting cable is then
wound around a mandrel and forged into a barrel
tube. Sometimes called a “laminated barrel.”
DEFLAG
To burn with great heat and light, producing large
volumes of gas. Smokeless gun powder is said
to deflagrate.
DERRINGER
A generic term applied to a large variety of pocket-size pistols of any ignition system, single or
multiple barreled. Sometimes spelled Deringer.
DETONATION
Exothermic reaction of a high ex
plosive; an extremely violent reaction at supersonic speed.
DOUBLE ACTION
A handgun mechanism in which a single pull of the trigger cocks and releases the hammer or
striker.
DRILL ROUND
A
dummy cartridge supplied by the military for troo
ps to practice loading and unloading drills with
firearms. See also Cartridge, Dummy.
39
DRILLING
A three-barreled shoulder arm in which a combination of smooth-bored and rifled barrels are
used.
DRY FIRING
Firing of an unloaded firearm to practice firearm handling and shooting skills.
EJECTION
A stage in the cycle of operation of a firearm in
which a cartridge or fired cartridge case is
expelled from the breech of a firearm.
EJECTOR
A portion of the firearm mechanism that ejects or
expels cartridges or fired cartridge cases when
the action is opened.
EXTRACTION
A stage in the cycle of operation of a firearm in
which a cartridge or fired cartridge case is
withdrawn from the chamber of a firearm.
EXTRACTOR
A mechanism for withdrawing the cartridge or fired
cartridge case from the chamber of a firearm.
FEEDING
A stage in the cycle of operation of a firearm in
which a fresh cartridge is introduced into the
mechanism from an ammunition supply in such a way that the breech mechanism may insert the
cartridge into the chamber. Feeding may also be accomplished manually.
FIREARM
A weapon from which a dangerous projectile may be pr
opelled by an explosive, or by gas or air.
Firearm does not include a smooth bore rifle or handgun designed and manufactured exclusively
for propelling by a spring, or by gas or air, BB’s not exceeding .177 caliber.
FIRING
A stage in the cycle of operation wherein the fi
ring mechanism is released by the sear and the
primer of the cartridge is struck by the firing pin to fire a shot.
FIRING PIN
That part of a firing mechanism that strikes the pr
imer of a cartridge to initiate ignition of the
propellant charge.
FLECHETTE
A thin, sub-caliber, fin-stabilized small dart or
arrow encased in a discarding sabot and loaded
into small arms ammunition or a shotgun shell.
FLINT-LOCK
1. Lock Mechanism--firing mechanism of a muzzle-loaded firearm wherein the frizzen is
integral with a hinged pan cover. The strike of
the flint on the frizze
n produces sparks and
simultaneously pivots the pan cover to expose
the fine-grain black powder priming charge
contained in the pan.
2. Firearm--muzzle-loading firearm utilizing
a flint-lock ignition mechanism. There have
been breech-loading, flint-lock firearms (Example: Ferguson rifle).
FRIZZEN
In flint-lock mechanism, the steel part placed
over the pan against which the flint strikes,
producing the sparks necessary to ignite the black powder priming charge.
4
0
FULL-AUTOMATIC
A firearm with the capacity to fire projectiles in
rapid succession during one press of the trigger.
GAS OPERATION
Method of operation of semiautomatic and automatic
firearms in which the force derived from the
propellant gases generated upon firing a cartridge is utilized to complete the cycle of operations.
Gas operated firearms usually depend on springs
to store energy for the purpose of feeding,
loading, cocking and locking the mechanism.
GRIP SAFETY
A mechanical safety in the grip of some firear
ms that prevents firing unt
il it is depressed by the
firing hand; this engages automatically when releas
ed to prevent the firearm from discharging.
HANDGUN
Any firearm designed, altered or intended to be aimed and fired by the action of one hand.
HANG-FIRE
An ammunition malfunction in which the cartridge ignition takes place after an appreciable delay
(fraction of a second to several seconds) after the primer has been struck.
HEADSPACE
The distance from the closed breech face of the
firearm mechanism to the surface in the chamber
upon which the cartridge case bores.
HEADSPACE GAUGE
A mechanical device for measuring the distance fr
om the breech face of a firearm mechanism to
that portion of the chamber against which a cartridge will bear. Headspace gauges are available
in three types: minimum, maximum, and field gauges.
HEADSPACE GAUGE – PURPOSE AND USE
The purpose of measuring headspace is to insure
that the firearm mechanism will lock correctly
when a maximum tolerance cartridge is loaded into a minimum tolerance firearm chamber
(Minimum Headspace) and that the firearm is safe to fire a minimum tolerance cartridge in a
maximum tolerance firearm chamber (Maximum
Headspace) without the possibility of damage to
the firearm or injury to the shooter or close spectators. Headspace gauges are used to decide
whether to permit a firearm with headspace in exce
ss of the maximum tolerance to continue to be
used in military service for emergency requirem
ents, and those with headspace in excess of the
field requirement considered too dangerous for
emergency use. Field headspace gauges have no
legitimate civilian or commercial application.
HEADSTAMP
Numbers, letters and symbols stamped on the head
of a cartridge case during manufacture to
identify the manufacturer, caliber or gauge, date of manufacture or other information.
IMPORTER
The name of an individual or company that brings
goods from off shore to the United States of
America or Canada for resale or distribution.
LEADS
That area forward of the chamber of a firearm that
is groove diameter or slightly larger, extending
forward to the origin or commencement of rifling. Also known as the Leed, Lead, Throat,
Chamber Throat or Forcing Cone.
LEVER ACTION
A magazine-repeating firearm design wherein the
breech mechanism is cycled by an external
lever, generally below the receiver or frame.
4
1
LOADING
A stage in the cycle of operation of a firearm in
which the cartridge is fully inserted into the
chamber in preparation fo
r the locking cycle.
LOCKING
A stage in the cycle of operation of a firearm in which the bolt, breech block or standing breech is
solidly secure
d in a fixed relationship with the
chamber, so as to resist being blown open by the
pressures generated by firing.
MANUFACTURER
The manufacturer is the individual or company that manufactures or subcontracts the
manufacture of any or all component parts of a
firearm. It may be possible to identify the fully
assembled firearm to the manufacturer if the
firearm has been marked with the manufacturer’s
company name or trademark.
MANUFACTURE DATES
Where the date of manufacture is found mark
ed on a firearm of government contract or
government arsenal production, the date of manuf
acture shall be included with the model, when
necessary, to uniquely identify that particula
r firearm from all others of its type.
MAKE
The make is normally the company name, abbreviation of the company name, brand or trade name
associated with the particular firearm.
MAGAZINE
1. A container for cartridges that has a spring and a follower to feed those cartridges into
the
chamber of a firearm. The magazine may be detachable or an integral part of the firearm.
2. A storage place for gun powder, ammunition or explosives.
MACHI
NE GUN
A firearm, as originally designed and manufactured, with the capacity of firing projectiles in rapid
succession
during one press of the trigger, whether or not it has been altered to fire only one projectile
with one such press.
MAGAZINE-REPEATING
FIREARM
A firearm fed by an inter
nal or external magazine.
MAGAZINE SAFETY
A mechanical safety mechanism found on some semiautomatic pistols that prevents firing when
the magazine is removed from the firearm.
MIS-FIRE
An ammunition malfunction in which firearm fails to discharge after the firing pin has struck an
adequate
blow to the primer and the initiated primer fails to ignite the propellant powder.
MULTI-BARREL
A
multiple-barrel firearm designed with the barrels permanently attached to each other and
capable of discharging multiple shots,
contingent on the number of barrels.
MUZZLE
The end of the barrel from which the projectile emerges.
42
MUZZLE, CROWN
Any of the various forms of muzzle treatment designed/meant primarily to protect the rifling.
It may take the form of a counter-bore, radius or chamfering of the muzzle.
MUZZLE BLAST
The resultant over-pressure blast /noise that occu
rs at the muzzle of a firearm when the projectile
exits the barrel and the rapidly expanding
propellant gasses are released.
MUZZLE-LOADER
Any firearm that is loaded with gun powder and pr
ojectile(s) through the muzzle end of the bore.
OPERATION CYCLE, FIREARM
A series of mechanical or manually operated event
s that take place in all firearms during the
discharge of ammunition. These terms are used to describe with technical accuracy the manner in
which the mechanism functions. This series
of events is described as follows:
1. Cocking
2. Feeding
3. Loading
4. Locking
5. Firing
6. Unlocking
7. Extraction
8. Ejection
(NOTE: These events do not necessarily
occur in the order described above.)
ORIGINAL
The word “original” refers to a model of firearm as produced by the manufacturer who first introduced
that model for commercial or contract sale
and also implies that a different business entity
has copied
or reproduced this model at some point in time.
PARADOX GUN
A firearm having a barrel design in which the majo
r
length of the barrel is smooth and the la
st 10 to 12
centimeters are rifled.
PERCUSSION
A means of ignition of a propellant charge by a mechanical blow against a primer or percussion cap.
PISTOL
A
loaded or unloaded firearm that is 30 inches or less in length, or a loaded or unloaded firearm
that by its construction and appearance conceals it as a firearm.
PROPELLANT
As it refers to firearms or firearms ammunition, a chemical, low-explosive mixture or composition
that
when ignited burns rapidly (deflagrates), generating large volumes of gas (to propel a projectile).
PUMP ACTI
ON
A magazine-repeating firearm design that is manually actuated in motion usually parallel to the barrel.
Pump Action firearms are also sometimes referred to as slide action or trombone action.
RECOIL OPERATION
Method of operation of semiautomatic and automatic firearms in which recoil energy imparted to
the barrel is used to actuate the mechanis
m to complete the cycle of operations.
4
3
REPEATING FIREARM
A firearm with a mechanism for feeding ammunition into the chamber known as magazine
or belt that accomplishes the entire cycle of
operation, either manually or externally
powered, or by utilizing some of
the power genera
ted by the propellant
gas or recoil force.
Some of these mechanisms, externally pow
ered systems or hand operated systems of
operation, include:
1. Pump action mechanisms
2. Lever action mechanisms
3. Bolt action mechanisms
4. Auto-loading or semiautomatic mechanisms; recoil-operated (both long and short
recoil) and gas-operated mechanisms
5. Automatic mechanisms; recoil operated (both long and short recoil) and gas operated
6. Manually powered, hand-operated, ro
tary-barrel mechanisms (Gatling gun)
7. Externally powered mechanisms (V
ulcan Gatling or Hughes Chain gun)
REPRODUCTION
The modern manufacture of any firearm that ha
s ceased to have patent protection and is usually
no longer manufactured by the original maker. No
rmally the reproduction is equal to or better in
quality of material and workmanship than the original and in some cases may be an exact
duplicate with interchangeable parts and components.
REVOLVER
A firearm, usually a handgun, with a cylinder having several chambers so arranged as to rotate around
an ax
is and be discharged successively by the same
firing mechanism
RIFLING
A system of helical grooves cut into the bore of a firearm barrel. The purpose of rifling is to impart
spin to a projectile passing thro
ugh the barrel, thus giving the pr
ojectile gyroscopic stability during
its flight to the target.
RECEIVER
The receiver, which is also known as the frame,
is the basic component of a firearm to which all
other components are assembled or attached. In mo
st firearm designs the barrel is assembled to
the receiver and the receiver houses the breech mechanism, trigger and firing mechanisms.
RIFLE
A firearm designed or redesigned, made or
remade, and intended to be fired from the shoulder and
designed or redesigned and made or remade to use the energy of the explosive in
a fixed metallic
cartridge to fire only a single projectile through a rifled bore for each single pull of the trigger.
SAFETY CATCH
Any type of applied safety catch. A mechanical
device that enables the sh
ooter to lock the firing
mechanism of a firearm voluntarily. Also called a manual safety or manually operated safety
catch. (NOTE: On most firearms with a fully-automatic fire capability, the fire selector usually
incorporates the safety catch.
SAFETY PRECAUTIONS
A series of actions, verifications and precautions that must be undertaken before, during and after handling
a firearm o
r during firing of firearms to prevent accidents and personal injury.
SAFETY, MECHANICAL
An automatic device that prevents firing a firearm as long as certain conditions are not met. A
feature incorporated into the firearm's design
to ensure that the weapon cannot fire, howeve
r
mishandled, before the breech is properly locked; and that the breech will not unlock until such
time as the projectile has left the barrel and
pressures generated to expel the projectile have
ropped to a safe operating level.
d
4
4
SEAR
Part of the firing mechanism, linked to the trigger, that retains the hammer or striker in the cocked
position until the trigger is pulled.
SELECTOR
1. In double-barreled firearms, a device to a
llow the shooter to choose which barrel is
to be fired by the first pull of the trigger.
2. A lever that enables the shooter to choos
e the type of fire (full-automatic/semi-
automatic) or apply the safety catch; in t
he case of some automatic weapons, the
selector enables the shooter to choose high or low cyclic rate of fire.
SEMIAUTOMATIC
A repeating firearm requiring a separate press of
the trigger for each shot
fired, using the energy
of discharge to perform a portion of the operating cycle. Semiautomatic actions are sometimes
referred to as auto-loading or self-loading actions.
SERIAL NUMBER
A combination of numbers and letters applied to a
firearm in order to uniquely identify it from all
others of its type. There is a requi
rement for the serial number to contain a minimum of one digit in
the combination of letters and numbers that comprise the serial number.
SHOT COLLAR
Plastic or paper insert surrounding the shot charge in
a shot shell to reduce distortion of the shot
when passing through the barrel.
SHOTGUN
A firearm designed or redesigned, made or remade and intended to fire from the shoulder and
designed or redesigned and made or remade to use
the energy of the explosive in a fixed shotgun
shell to fire through a smooth bore either a number of
ball shot or a single projectile for each single
function of the trigger.
SHOT
Pellets of various sizes used in shot shells and shot cartridges.
SIGHT, BUCKHORN
A rear sight for rifles that has the “V” notch at
the bottom of an almost completely closed V.
SIGHT, PAINE
A rear sight on pistols or revolvers having a flat top with a V-shaped notch used with a bead
pped front sight. Named after Ira Paine, a 19
th
-century exhibition and competition shooter.
to
SIGHT, PATRIDGE
A rear sight on pistols or revolvers having a flat top with a square notch used with a broad
flat-topped front sight. Named after E.E. Patridge.
SIGHT, PYRAMID
A type of front sight of triangular appe
arance. Also called a Barley-Corn sight.
SIGHT RADIUS
The distance between the rear sight and the front sight on a firearm.
SIGHT RAMP
A front sight mounted on a ramp base.
SIGHT TANG
Any sight mounted on the upper tang of a firearm.
4
5
SIGHT TANGENT
A rear sight in which the blade is adjusted for el
evation correc
tion
by sliding along a curved cam o
r
cams. The term is also us
ed for vertically standing back sights with sliding rear apertures.
SIGHTS
1. ADJUSTABLE - Usually taken to mean a rear sight that is adjustable for windage
or elevation or both. O
ccasionally adjus
table front sights may be found on pistols or
revolvers.
2. APERTURE - A form of metallic sight, fr
ont or rear, containing an aperture or disc
with a hole. Also called a Peep Sight.
3. BEAD - A form of front sight, usua
lly found on shotguns,
having the appearance
of a round bead.
4. EXPRESS- A series of rear sights, mounted on one base, with folding sight
leaves to be used for varying ranges or elevations.
5. FIXED - Metallic sights that are not adjustable.
6. GLOBE - A form of front sight usually used
on target rifles, generally cylindrical in shape
and often arranged to accept various insert
s containing either rings or posts.
7. HOODED - A front sight that is provided with a cover to shade it from direct light.
8. TELESCOPIC - A sight containing optical elements that magnify the target.
9. VERNIER - A long-range sight with a
mechanism for adjusting windage, elevation
or both, as read on a scale in conjunct
ion with graduations on a longer, linear
calibrated scale.
SILENCER
A device capable of attachment to the barrel of
a firearm designed or intended to reduce the
noise of discharge of ammunition
SINGLE-SHOT
A single-barrel firearm design that must be manually loaded, having no internal or external
magazine feed device. Certain single-shot firearms
are operated by levers and certain single-shot
firearms are operated by a bolt. Regardless of
the method of operating the breech mechanism,
these firearms are single-shot firearm actions.
SINGLE ACTION
An action that requires the manual cocking of the
hammer before pressure on the trigger releases
the firing mechanism.
SMALL ARMS
Hand-operated, hand- or shoulder-controlled firearms, including machine
guns, up to and including
.50 caliber. It is generally ac
cepted that firearms in excess of .50 caliber up to and including 30mm
caliber are called cannon, while firearms in excess of 30mm are artillery.
SPRING
A mechanical device used to store energy.
STOCK
A component, usually wood, to which a barreled ac
tion is attached, enabling the shooter to hold
the firearm and control it from the shoulder.
SUBMACHINE GUN
A firearm design that, as originally designed an
d manufactured, has the capacity of firing
projectiles in rapid succession during one press of
the trigger, whether or not it has been altered
to fire only one projectile with one such press. In general terms a submachine gun is a compact,
hort-barreled, air-cooled, magazine-fed firearm,
usually chambered for a pistol cartridge.
s
SYMPATHETIC DISCHARGE
The simultaneous firing of two or more cartridges
chambered in the cylinder of a revolver, only one
of which is in exact alignment with the barrel;
normally associated with percussion revolvers.
4
6
TAKE-DOWN FIREARMS
A rifle or shotgun in which the barrel and sometimes the magazine and fore-end are designed to
be removed from the receiver readily, without the use of tools, for the purpose of making a more
compact item for ease of transportation. When
additional barrels are available for a take-down
firearm, these barrels are considered accessory
barrels. See definition of accessory barrels.
TOP-BREAK
A term used to describe a single-shot, multi-barrel
or revolver mechanism on which the barrel o
r
barrels are allowed to tip down at the muzzle
exposing the chamber or chambers for loading,
unloading or extraction of cartridges.
TOP-LEVER
The lever located on the top of the breech end of
hinged-frame firearms that when pushed to one
side will unlock the barrel
(s) from the receiver or
frame and allow them to move (left, right, forward,
rearward, tip-down or tip-up).
TRIGGER
That part of a firearm mechanism that is moved
manually to cause the firearm to discharge.
TRIGGER , RELEASE
An unconventional mechanism in which the firearm is
fired by the release, rather than by the pull
of the trigger.
TRIGGER, SET
Either a single or double trigger arrangement
on which the required trigger pull force can be made
very light by means of a "setting" mechanism.
UNLOCKING
A stage in the cycle of operation of a firearm in which the bolt, breech block or standing breech is
removed from fixed relationship with the chamber, so
as to permit the extraction and ejection cycle
to take place after pressures have dropped to a safe operating level.
VIERLING
A four-barreled shoulder arm that usually
has two smooth-bored and two rifled barrels.
WATER TABLE
The flat portion of the receiver or frame on fir
earms that break open, ex
tending forward from, and
is approximately at right angles to, the standing-b
reech face. This is the surface on which the
barrel flats rest when the action is closed.
47

Wednesday, March 22, 2017

How to Build an AR15

How to Build an AR15 Lower

Build Ar-15 Lower
Custom Search
Building your AR15 is a rewarding experience and it allows you to configure your rifle exactly how you want it. Building your rifle from scratch is usually less costly and helps you avoid having to deal with any unwanted parts you might be left with when upgrading an existing rifle. Cheaper Than Dirt! wants to help you create your custom assault rifle by not only providing you with the tools, but also the knowledge you need to build your perfect AR15.

The first step in the building process is to purchase a stripped lower receiver. The lower receiver is considered a firearm unlike the rest of the AR15 parts you will need. If you want to know more about how to buy a firearm online you can refer to our easy-to-follow guide.

Select a Lower Receiver Group to view images.

LOWER RECEIVER GROUP








Step No. 2 is to buy all the parts you need to assemble the rifle. Complete rifle kits with a prebuilt upper will include everything you need to complete a functioning rifle (minus the stripped lower receiver). You can also buy the parts à la carte if you would like a more customized rifle.
AR15 Upper Receiver

Select a Upper Receiver Group to view images.

UPPER RECEIVER GROUP









AR15 Rilfe
Select a Optional Part to view images.

OPTIONAL PARTS

Upper Receiver Group






Lower Receiver Group

Building the Lower Receiver

When you have all of your parts ready to install on your stripped lower receiver, make sure you have a clean and clear workspace.


You have completed your lower receiver! If you have purchased a preassembled upper receiver you can now pin that to your lower receiver with the pivot and takedown pins. Once the upper and lower receiver aremated together you are ready to go to the range and sight in your new AR15.

AR15 Tools




Saturday, March 18, 2017

U.S. Bureau of Land Management Injures 14 yr old Idaho boy and kills his dog.

This Thursday, March 16, 2017 photo released by the Bannock County Sheriff's Office shows a cyanide device in Pocatello, Idaho, The cyanide device, called M-44, is spring-activated and shoots poison that is meant to kill predators. The U.S. Department of Agriculture released a statement Friday, March 17, 2017, confirming that workers placed the device that activated Thursday which resulted in the death of a 3-year-old Lab named Casey. Bannock County Sheriff Lorin Nielsen says a 14-year-old boy was taken to a hospital to be tested for cyanide poisoning but was not seriously injured and was released. (Bannock County Sheriff's Office via AP)

POCATELLO, Idaho — Federal authorities have confirmed that a cyanide trap intended to kill coyotes in eastern Idaho instead killed a dog in an incident that local law enforcement officials say also injured a 14-year-old boy.
  The cyanide device, called M-44, is spring-activated and shoots poison that is meant to kill…
 The U.S. Department of Agriculture acknowledged Friday that workers with its Animal and Plant Health Inspection Service's Wildlife Services placed the device called an M-44. The device activated and killed a 3-year-old Lab named Casey on Thursday near Pocatello. He said the device was on top of a ridge about 500 yards from the boy's home, which is in a foothills area with other homes outside Pocatello.
 Theresa Mansfield, the boy's mother, said her son was walking their dog on a hillside behind their home when they encountered the device. She said her son was knocked down when it activated, and that he watched as the dog died.
 WHAT THE HELL ARE THEIR LAZY ASS' DOING SETTING THESE THAT CLOSE TO HUMAN POPULATION?? SAME THING WILL HAPPEN IF THOSE STUPID SOBs START POISONING  HOGS!!

Saturday, March 11, 2017

30CAL SUPPRESSORS





Sale!
american resistance silencers
american resistance silencerssilencersilencers

AMERICAN RESISTANCE/BRC 30CAL SUPPRESSORS

$599.99$499.99
OUR SUPPRESSORS CAN BE USED ON CALIBERS AS BIG AS 300WINMAG, AND AS SMALL AS 22LR.
UNTOUCHABLE PERFORMANCE ON THE 300BLACKOUT WITH SUB-SONIC AMMO, AND SUB-SONIC 9MM AMMO ON THE CARBINE SYSTEMS!
CALL OUR SHOP FOR DEALER INQUIRIES, LAW ENFORCEMENT & VETERAN DISCOUNTS.  ONCE YOUR ORDER IS PLACED, IF YOU NEED YOUR SUPPRESSOR SHIPPED, PLEASE CALL (936-569-9400) OR EMAIL US (MICHAEL@AMERICANRESISTANCEGEAR.COM) SO WE GET YOUR NFA ITEM TRANSFERRED TO YOUR LOCAL DEALER ASAP.

Product Description

Here’s a video of us trying the American Resistance/BRC 30cal Suppressor on a Scorpion EVO 7.7″ 9mm with 147gr sub-sonic ammo.

  • 30cal Suppressor specs (STAINLESS STEEL):
  • FULL-AUTO RATED
  • 8″ LONG (TOTAL LENGTH)
  •  PROPRIETARY MONO-CORE BAFFLE DESIGN (303 SS)
  • STAINLESS STEEL TUBE (304 SS)
  • 1.5″ OUTSIDE DIAMETER
  • .4062 INSIDE DIAMETER (ROUND CLEARANCE)
  • 5/8X24″ DIRECT THREAD
  • WEIGHT 1lb 3oz
  • HIGH TEMP CERAKOTE
  • MACHINED USING STATE OF THE ART CNC MILLING AND LATHE WITH OVER 20 YEARS OF MACHINING EXPERIENCE
WARNING!!! WARNING!!! WARNING!!!
DO NOT USE OUR SUPPRESSORS ON ANY RIFLE OR PISTOL IN 300BLACKOUT WITH A BARREL SHORTER THAN 8″.
DO NOT USE OUR SUPPRESSORS ON ANY RIFLE OR PISTOL IN .223/5.56 WITH A BARREL SHORTER THAN 10.5″

AMERICAN RESISTANCE OR BLACK RIFLE CUSTOMS IS NOT RESPONSIBLE FOR REPAIRS OR INJURY IF YOU USE YOUR SUPPRESSOR ON THE ABOVE MENTIONED BARREL LENGHTS!!!!



:)

AR15 Lower Receiver


Sale!
ar15 lower
BLR-2TCC Lowerar15 lower

Critical Capabilities Billet AR15 Lower Receiver

$149.99 $119.99
Critical Capabilities Billet Aluminum AR15 Lower Receivers! Please provide FFL information of where you want yours sent.
In stock

Product Description

Critical Capabilities’ Billet Lower Receivers are functional, beautiful, and affordable. They are also packed with features:
7075 T-6 aircraft grade billet aluminum
Hard anodized per Mil-Spec 8625 Type 3 Class 2
Multi-caliber marked
Precision broached magwell with beveled feed lips
Machined and engraved to be compatible with 45/60 degree short throw selectors
Compatible with all Mil-Spec components and magazines
Compatible with most after market parts, such as the Magpul BAD Lever, Norgon mag release, etc.
Rear-takedown pin spring capture screw for easy installation
Bolt catch pin replaced by threaded rod for easy installation
Upper tensioning screw removes slop between upper and lower receivers
Ambi trigger finger rests with grooves above and below mag release/catch
Integrated large opening, ‘winter’ trigger guard
Manufactured to Mil-Spec dimensions
Manufacturer: Critical Capabilities LLC
Model: NC-15
Caliber: Multi
:)