PF-9

• 
• 
• 
• 
• 

Technical specs

Calibers:	9mm Luger	9 x 19 mm
Weight unloaded:	12.7 oz.	360g
Loaded magazine:	2.8 oz.	81g
Length:	5.85"	149mm
Height:	4.3"	109mm
Width:	0.88"	22mm
Barrel Length:	3.1"	79mm
Capacity:		7 + 1
Trigger Pull:	5 lbs	23N

MSRP

$356.36

Description

The PF-9 is a semi-automatic, locked breech pistol, chambered for the 9mm Luger cartridge. It has been developed from our highly successful P-11 and P-3AT pistols with maximum concealability in mind. The PF-9 has a single stack magazine holding 7 rounds. It is one of the lightest and flattest 9 mm ever made. Firing mechanism is Double-Action Only with an automatic hammer block safety. The PF-9 is available in blued, parkerized, and hard chrome finishes. Grips are in black, grey, and olive drab. The PF-9 retains the best features from our P-11 and P-3AT pistols combined into the flattest and lightest single stack 9mm configuration ever made. The barrel, locking system, slide stop, assembly pin, front sight, recoil springs and guide rod are adapted from the P-11. The PF-9 is nearly identical to the P-11 in length and height and shares the same exterior controls. The shorter trigger system with integral hammer block and the extraction system are adapted from the P-3AT. Just like the P-11, the PF-9 will accept +P ammunition, however, not with continuous use.      The rear sight is a new design and is adjustable for windage with the supplied allen wrench as well as for elevation with the use of shims (not included). The included 7 round rectangular magazine is supplied with a finger extension base plate and numbered holes. The under barrel accessory rail shares the dimensions of the MIL-STD-1913 picatinny rail although there is only one locking notch in the forward position.