Mossberg MMR AR-15 New M-Lok & Sub MOA – Full Review
The
new-for-2016 Mossberg Modern Rifle (MMR) is a thoughtful combination of
the best features and performance possible at a reasonable price. Image courtesy of manufacturer.
For more information, visit
http://www.mossberg.com/.
To purchase on GunsAmerica.com, click this link:
https://www.gunsamerica.com/Search.aspx?T=MMR.
Mossberg
has long been known for providing value-priced firearms that get the
job done. In fact, my first real gun was a Mossberg 20 gauge shotgun
that has taken many birds and deer. It was a no-frills field gun, but it
never let me down.
Mossberg starting selling their first AR-15
rifles in 2011. The original MMRs were true to the Mossberg roots—solid
rifles at attractive price points. They included the MMR Hunter series
and MMR Tactical series rifles. For 2016, Mossberg decided it was time
to update the MMR and in doing so, they’ve taken it to a new level. The
older versions of the MMRs are no longer available as Mossberg rolls out
the updated models of the
MMRs.
A 30-round metal magazine comes with the gun. This Magpul 10-rounder also worked well as did a Bushmaster mag.
SPECS
- Chambering: 5.56 NATO/.223 Rem.
- Barrel: 16-25 inches
- OA Length: 35.75 inches
- Weight: 6.75 pounds
- Stock: Six-position collapsible
- Sights: Post front, adjustable rear
- Action: Direct gas impingement
- Finish: Phosphate/anodized
- Capacity: 30+1
- MSRP: $910
The
first new MMR is a basic model intended as an all-around carbine.
Although basic, each component was carefully considered. The most
obvious change is the slim new 13-inch aluminum handguard that wraps
around the free-floating, A2-profile barrel. It’s also a good example of
the thought process that went into building this gun.
The
previous MMR wore a quad rail forend. Picatinny rails are great for
mounting accessories, however, when you get a bunch of accessories
attached to the handguard, it starts to get bulky. The sharp-edged rails
can also be hard on the hands. In 2007 Magpul developed their first
slot system to address this. They called it their MOE mounting system
and it allowed attaching accessories directly to the handguard without
the need for a rail. However, there was a drawback in that you needed to
access the back of the handguard to install accessories.
Then in
2012, VLTOR and Noveske teamed up to develop Keymod. With the Keymod
system, you could attach your accessories without the need to have
access to the back of the handguard. Keymod use has been growing in
popularity, but Magpul wasn’t about to leave it at that.
The new
Magpul standard is called M-Lok, which stands for Modular Lock system.
The slots are a little bigger than the MOE system and it’s no longer
necessary to access the back of the handguard. The accessories are held
in place by cammed T-nuts. This makes installation of M-Lok parts as
easy as the Keymod system with added benefits. Due to the way Keymod
functions, you can only install accessories one way. You have to go from
the wide end of the slot to the narrow end. M-Lok accessories can be
installed either way, giving you added positions for spacing. They also
incorporate recoil lugs making the M-Lok mounts more resistant to
shifting under recoil.
The slim new M-Lok handguard offers lots of locations to attach accessories.
Answering The Why
M-Lok
accessories can be mounted facing in either direction and are held fast
by a combination of cammed T-Nut and recoil lugs which extend into the
slots. Image courtesy of manufacturer.
When I asked the folks at Mossberg about their thinking in going with the M-Lok system, this is what they told me:
- Magpul/M-Lok market share is stronger
- Direct attachment—Customer does not have to use aluminum rail mounts
- Direct mount capability—No access to back side of rail required
- Four-axis recoil-mitigation lugs—At every increment, accessories are supported by lugs on all four sides
- Adjusts evenly in 1/2 slot increments for precise accessory placement
- Multi-directional Mounting—Accessories can mount with either end facing forward
- #10 mounting screw—For greater strength and fewer stripped screw heads
- Optimized for both metal and polymer—Easy to manufacture, plus stronger and more secure
- Custom, self-aligning T-nut—Strong, inexpensive, and easy to use
So
you can see they didn’t just stick it on because it looks good,
although it does. They methodically identified what would be best for
their customers in the long run. Which attachment system will have the
most products, which system is superior in everyday use, which system is
more versatile? That’s the philosophy I see reflected in the entire
gun.
Intelligent Options
There’s a
full-length rail mounted on top for sights. The supplied iron sights are
target adjustable and the longer top of the handguard provides added
sight radius.
The MMR sports a typical AR-pattern birdcage flash suppressor because it works.
The
A2 profile barrel with mid-length gas tube is a good all-around barrel.
It’s also ramped for more reliable feeding. The gas system is direct
impingement for simplicity and reliability, and the barrel is free
floated for accuracy. While the earlier MMR had 1:9 rifling, the updated
MMR has 1:8 to stabilize the heavier bullets gaining popularity. In the
range report you’ll see that this rifle really likes the Hornady
75-grain boat tail hollow points (BTHP).
The trigger has a typical
mil-spec weight of 7 pounds, but is free of creep and is not at all
gritty. That’s not typical. It provides a nice clean break with the
reliability and safety factors afforded by a mil-spec trigger. I prefer a
lighter trigger, but there are options available in the aftermarket if a
little polishing doesn’t get you where you want to be.
The stock
is a UTG Pro six-position adjustable unit that provides the best fit
regardless of what you’re wearing, from a summer T-shirt to a winter
parka. The Magpul trigger guard is curved to provide more room for
gloved fingers.
All-in-all, the build quality is excellent. The
upper and lower fit together as well as any mass-produced AR you’ll
find. They’ll also interchange with other AR-pattern rifles. The steel
surfaces are phosphate coated and the aluminum is anodized. If you’re
not familiar with phosphate coating, commonly called Parkerizing
(although that is actually a proprietary name which has come into common
usage much like Kleenex), it’s a method for providing corrosion
resistance that’s been in use by our military for decades. It provides
more corrosion protection than bluing and also adds lubricity and
anti-spalling properties.
The
MMR is at its heart an improved AR. It takes all the strengths of the
basic design and adds thoughtful upgrades and enhancements.
The
bolt is made from Carpenter 158 steel, which is what Eugene Stoner
specified in his original design to withstand the stresses on the
locking lugs and the area of the bolt where the cam pin hole is found.
Some other lower-price ARs use 8620 steel because it’s cheaper, although
not as strong. Mossberg stayed with Stoner’s specs for longer bolt
life. The bolt also gets phosphate coating.
Mossberg
eliminated the forward assist and dustcover. It makes the MMR a little
easier to maintain and less expensive to produce. Note the enlarged
Magpul trigger guard.
ARs with 16-inch barrels generally
utilize carbine length gas tubes or the newer mid-length tubes. The
mid-length tubes run at lower pressures at the port which means less
stress on internal parts and longer life/dependability. Mossberg went
with the mid-length gas tube.
The included Magpul pistol grip is
comfortable and well-positioned for extended shooting. It also doesn’t
get sticky or oily in the heat like some rubber grips do. A storage
compartment affords a handy place to keep backup batteries for your
optic.
The birdcage flash suppressor is typical AR and, with slots
only in the top, offers some compensation to offset muzzle rise. The
most atypical features are the lack of a forward assist and dust cover.
In both cases, I believe it’s a better gun without them. The forward
assist is something that most people will never use in a sporting rifle.
The dustcover is a maintenance item and is flimsy enough that it could
easily be bent. They are both items I would gladly eliminate to get to
the price point Mossberg has set for this gun.
MSRP is $910.00.
That’s $10 less than the price of the gun it replaces, the old style
MMR. You’ll find street prices to be significantly less.
Range Performance
The
MMR is an easy gun to shoot, as are most ARs. It’s light with modest
recoil and the top rail provides a sturdy mount for optics. For accuracy
at 100 yards, I fired from a bench resting the gun on a wooden block.
The first day at the range I used a Caldwell Lead Sled. The second day
when I got to the range, 80 miles from my house, I realized the Lead
Sled wasn’t in my truck. Oops. So I fired anyway. I figured you won’t
be shooting from a Lead sled when you’re drawing down on that trophy
jackalope.
I’m just an average shot, so the figures listed here
aren’t a thorough test of each brand of ammo. But it’s obvious that this
is a better than 1 MOA gun. My three best groups were 0.935, 0.805 and
0.771 inches. It’s nice to see that Mossberg still delivers.
The
ammo was graciously provided by Federal and Hornady. It worked great
and is capable of much better groups than this average shooter can
manage.
The Hornady .223 Rem 75-grain BTHP load performed extremely well in the MMR. This is a great round for reaching out.
The
MMR is chambered for 5.56 NATO so it will shoot both 5.56 and .223
Remington ammo. The ammo used for evaluation ranged in price from less
than fifty cents a round for the American Eagle to more than a dollar a
round for the Hornady 75-grain load. Sighting-in was accomplished with
the American Eagle 50-grain JHP Varmint and Predator ammunition from
Federal. That was the lightest load tested. I then ran through the
various cartridges increasing bullet weight till I got to the Hornady
.223 Rem 75-grain BTHP.
Like most guns, the MMR showed a
preference for some loads. My best groups were with the Hornady .223 Rem
55-grain V-Max, the Hornady .223 Rem 75-grain BTHP Match and a .223
handload using a 60-grain Nosler Varmint over 25 grains of Hodgdon
Varget. However, all brands grouped into 1½ inch or less, which is
excellent. We aren’t just in the golden age of guns today, we’re in the
golden age of ammunition too. New shooters will take the consistency
we’re seeing from the ammo manufacturers for granted, but if you’ve been
around for a while, you know how much better ammo is today.
The UTG Pro six-position collapsible stock makes a lot of sense for a general use carbine.
As
I said earlier, Mossberg has discontinued production of the earlier MMR
models although you can still find some for sale. But when that
inventory is gone, there won’t be anymore. Which is okay with me since
the updated model provides even more value. Did I mention that it’s $10
less than the original MMR with iron sights!
Mossberg
will continue to introduce more models and calibers of MMR through
2017. In the meantime, if you’re in the market for a solid performing
basic AR-15 for hunting, competition or home defense, I highly recommend
the new Mossberg MMR. It’s a quality gun at a great price point, and
from an American company that’s been around since 1919.